Alignment & Adjustment
3-16
Samsung Electronics
3-5 Software Upgrade
3-5-1 Source Program Download & Generals
1. Downloading boot code
(1) Turn off PDP-TV.
(2) Connect the RS-232 serial cable to the service jack of PDP-TV.
(3) Enter the DOS Mode and move to the directory including "bootdn.bat" and Excute the file.
(4) Turn on PDP-TV.
2. Downloading application code
(1) Turn off PDP-TV.
(2) Connect the RS-232 serial cable to the service jack of PDP-TV.
(3) Enter the DOS Mode and move to the directory including "appdn.bat" and Excute the file.
(4) Power on PDP-TV.
■
Changing RS-232 serial port and downloaded file
If you want to change serial port, you must edit "bootdn.bat" and "appdn.bat".
"bootdn.bat"
→
sdn 1 0xdeadbbbb rom
execution file
file to be downloaded
port number
downloading type : boot image
"appdn.bat"
→
sdn 1 0xdeadaaaa ram.z
execution file
file to be downloaded
port number
downloading type : application image
1. Don' t turn off during downloading.
2. sdn.exe, download file and Batch file should be in the same directory.
3. During Downloading, Hyper Terminal should be turned off.
(2) Enter a new name.
(3) Select a modem port.(com 1 and direct connection.)
(4) Set the bit/second to 115200.
(5) Set the data bit to 8
(6) No parity bit.
(7) Set stop bit to 1.
(8) No flow control.
(9) Save in memory.
(10) At this point, the new hyper terminal is ready.
Summary of Contents for HPR4272CX/XAC
