English
45
03
Setup
Support
Software Upgrade
This menu allows you to upgrade software for
performance improvements or additional services.
You can check the current software version,
upgrade by internet and set the Auto upgrade
notifi cation. If the product is properly connected to
the network by cable or wirelessly, the product will
automatically connect to our website each time it is
turned on and download update fi les if any valid
upgrade exists.
Display
Audio
System
Network
Language
Security
General
Support
Settings
Software Upgrade
Disc Menu
:
Audio :
Subtitle :
Software Upgrade
Current Version
: XXX-XXXXXXXXX
By Internet
|
Auto Upgrade Notifi cation : On
>
Move
s
Select
r
Return
To select
By Internet
, press the
ENTER
button.
A popup message will appear if an update is
available.
If you select
Yes
, the product will turn off
automatically before restarting.
(Never turn it on manually.)
The update progress popup will appear.
When the update is completed, the product
will turn back off automatically.
Press the
POWER
button to turn on the
product.
NOTE
The Update will be completed when the
product turns off after restarting. Press the
POWER
button to turn on the updated product
for your use. Never turn off or on the product
manually during the update process.
Samsung Electronics shall take no legal
responsibility for product malfunction caused an
unstable internet connection or consumer
negligence during software upgrade.
1.
2.
3.
4.
✎
You can update software in any of the two ways
as follows: Software update is the same as in the
By Internet
menu.
USB
: Visit www.samsung.com/bluraysupport,
then download and store the latest software
(RUF fi le) into the USB fl ash drive. Connect the
USB fl ash drive to the USB port of the product
(disc tray must be empty) to update the
software, then follow the on-screen
instructions.
CD
: Visit www.samsung.com/bluraysupport,
download and write the latest software (RUF
fi le) onto a disc. Insert and play the disc in the
product to start the update, then follow the on-
screen instructions.
NOTE
Software upgrades using the USB Host jack
must be performed with no disc inside.
If you want to cancel the upgrade in the
process of downloading the upgrade data,
press the
ENTER
button.
When the system upgrade is done, check the
software details in the software Upgrade
menu.
Do not turn off the product during the System
Upgrade, as it may cause the product to not
work properly.
Do not use USB devices other than USB Flash
Drives to do software upgrades when using
the USB Host jack.
Contact Samsung
Provide contact information for assistance with
your product.
•
•
✎
HT-C5900_5950W_XSA_0504.indd 45
HT-C5900_5950W_XSA_0504.indd 45
2010-05-04 11:11:04
2010-05-04 11:11:04
Summary of Contents for HT-C5900
Page 71: ...Code No AH68 02298N ...