22
English
Connections
This section involves various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Connecting the Subwoofer
To activate the product, you must connect the subwoofer to the product using the system cable.
Most of external connections including power supply, speakers and TV are made through the
subwoofer.
CAUTION
Do not plug or unplug the system cable during the power cord is plugged. Otherwise, it can cause
damage to the product.
Attaching the Toroidal Ferrite Core to the Power Cord of the Subwoofer
If you attach a Toroidal ferrite core to the power cord of the
Subwoofer, it will help to prevent RF interference from radio signals.
Pull the fi xing tab of the Toroidal ferrite core to open it.
Make three loops in the power cable of the subwoofer.
Attach the Toroidal ferrite core to the Subwoofer power cord as the fi gure
shows and press it until it clicks.
Attaching the Toroidal Ferrite Core to the System Cable
Pull the fi xing tab of the Toroidal ferrite core to open it.
Insert two cores into one end of the system cable, and the other core into the other end of the
system cable (connected between product and subwoofer). Then, press to close the cores until
you hear a click as shown.
- Unlike attaching ferrite core to the power cable, do not make loops around the core with the
system cable and simply plug in the core and fi x it.
!
1.
2.
3.
1.
2.
HT-C9930_ELS_0914.indd 22
HT-C9930_ELS_0914.indd 22
2010-09-14 6:51:58
2010-09-14 6:51:58
