English
61
04
Basic Functions
Turn on your product.
To listen to music from iPod/iPhone over the
product, press the
FUNC.
button on the
product to select "
iPod
" mode.
After you select "
iPod
" mode, turn the
volume of the product down to avoid hearing
damage.
You can control the speaker volume of iPod/
iPhone with a volume wheel or a volume bar.
When iPod/iPhone is stopped or in a power
saving mode, a Wireless transmitter is turned
to the Sleep Mode.
When iPod/iPhone is turned to the Deep
Sleep Mode, the Wireless transmitter is off.
Operation status of the wireless
transmitter's LED
CHA
RG
E
STANDB
Y
LIN
K
STANDB
Y
LINK
6.
•
•
•
•
Display
Function
LINK
(Blue LED)
STANDBY
(Red LED)
LED ON
Pairing
successfully
completed
STANDBY
LED BLINK
(Long blink)
Processing iPod/
iPhone
LOW BATTERY
LED BLINK
(Short blink)
Processing
pairing
Pairing failed
CAUTION
If you use the main unit nearby a wireless
device such as a laptop computer, an AP, or
Wifi , any unstable operation error can happen.
Do not insert any other card except the TX
card dedicated to the product. If a different TX
card is used, the product may be damaged or
the card may not be removed easily.
Do not insert the TX card or in the reverse
direction.
Insert the TX card when the product is turned
off. Inserting the card when it is turned on may
cause a problem.
The transmission distance from the product to
the wireless transmitter is about 5m, but may
vary depending on your operation environment.
The audio signal may be weakened or even lost
where there exists an obstacle such as a wall or
partition between the product and wireless
transmitter or if you move around carrying the
wireless transmitter.
!
HT-C9930_ELS_0914.indd 61
HT-C9930_ELS_0914.indd 61
2010-09-14 6:54:02
2010-09-14 6:54:02