67
Operating a TV with the Remote Control
•
The remote control may not work on some brands of TVs. Also some operations may not be
possible depending on your brand of TV.
•
If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
When operating a TV with the remote control
1
Press the
MODE
button to make the TV
indicator on the remote control flash.
2
Press
POWER
button to turn on the TV.
3
Point the remote control toward the TV.
4
While holding down
POWER
, enter the code
corresponding to your brand of TV.
•
If the code matches the TV's code, the TV will be turned off.
•
If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down
POWER
, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
•
You can use the POWER, TV/VIDEO, VOLUME, CHANNEL, and
Numeric buttons (0~9).
5
Pont the remote control toward the TV and press
POWER
. If the TV turns off or on, the setting is
complete.
TV
DVD RECEIVER
Note
41P~74P(DS400)-SECA GB 11/10/04 9:16 AM Page 66