|
16
English
Connections
Connecting The Speakers
1.
Match each speaker cable bundle to the correct speaker by matching the
color coded plug on each bundle to the colored sticker on the bottom of
each speaker.
2.
To attach speaker wire to each speaker:
a.
Press down the red tab on the back of the speaker, insert the red wire,
and then release the tab.
b.
Press down the black tab on the back of the speaker, insert the black
wire, and then release the tab.
3.
Connect the speaker wire plugs from each speaker to the back of the
product by matching the colors of the speaker plugs to the colors of the
speaker jacks.
4.
With the product turned off, insert the TX card into the TX Card
Connection (
WIRELESS
) on the back of the product.
• Hold the TX card so that the label "WIRELESS" faces upward
and insert the card into the port.
• The TX card enables communication between the product and
the wireless receiver module.
5.
Connect the left and right surround speakers to the wireless
receiver module. Again, match the color of the plugs to the jacks
on the wireless receiver module.
6.
Plug the power cord of the wireless receiver module into the
wall outlet.
7.
Turn on the product. The product and wireless receiver module will
now communicate with each other and you will hear sound from
the Surround speakers.
Black
Red
LAN
WIRELESS
HDMI OUT
TX card
Speaker Components
SUBWOOFER
SPEAKER CABLE
CENTER
FRONT
(L)
(R)
(L)
(R)
SURROUND
SWA-5000
Wireless Receiver Module
TX Card
Speaker Cable (2EA)
HT-E5500W_ZA_0417-1(D2D).indd 16
2012-04-17 오후 6:58:42
