|
36
English
Settings
Upgrading Software
The Software Update menu allows you to
upgrade the product’s software for performance
improvements or additional services.
•
Never turn the product off or back on manually during
the update process.
1 .
In the Home menu, select
Settings
, and then
press the
E
button.
2 .
Select
Support
, and then press the
E
button.
3 .
Select
Software Update
, and then press the
E
button.
4 .
Select one of the following methods:
•
Online
•
By USB
•
By Disc
•
By Downloaded
•
Standby Mode Upgrade
5 .
Press the
E
button.
Directions for each method begin below.
|
NOTE
|
The upgrade is complete when the product turns off, and
then turns on again by itself.
Samsung Electronics takes no legal responsibility for product
malfunction caused by an unstable Internet connection or
consumer negligence during a Software Update.
If you want to cancel the upgrade while the upgrade
software is downloading, press the
E
button.
Online
Your product must be connected to the Internet to
use the Online function.
1 .
Select
Online
, and then press the
E
button.
The Connecting to Server message appears.
2 .
If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
3 .
When the download is complete, the
Upgrade Query window appears with three
choices:
Update now
,
Update later
or
Don’t update
.
4 .
If you select
Update now
, the product
upgrades the software, turns off, and then
turns on automatically.
5 .
If you do not make a selection in one minute
or select
Update later
, the product stores
the new upgrade software. You can upgrade
the software later using the
By Downloaded
function.
6 .
If you select
Don’t update
, the product
cancels the upgrade.
By USB
1 .
Visit www.samsung.com.
2 .
Click
SUPPORT
on the top right of the page.
3 .
Enter the product's model number into the
search field, and then click
Find Product
.
4 .
Click
Get downloads
in the center of the
page below the Downloads header.
5 .
Click
Firmware
in the center of the page.
6 .
Click the
ZIP
icon in the File column on the
right side of the page.
7 .
Click
OK
in the pop-up that appears to
download and save the firmware file to your
PC.
8 .
Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
9 .
Copy the folder to a USB flash drive.
10 .
Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
11 .
In the product’s menu, go to
Settings
>
Support
>
Software Update
.
12 .
Select
By USB
.
|
NOTE
|
There should be no disc in the product when you upgrade
the software using the USB Host jack.
When the Software Update is done, check the software
details in the
Software Update
menu.
Do not turn off the product during the Software Update. It
may cause the product to malfunction.
Software Updates using the USB Host jack must be
performed with a USB flash memory stick only.
HT-E6500W_ZA_0417-1(D2D).indd 36
2012-04-17 오후 7:02:35