English
17
02
Connections
Installing the Speakers on the Tallboy Stand
* HT-E655WK - Front/Surround Speakers
1.
Turn the Stand Base upside-down and connect it to the Stand.
2.
Insert small screws (4*20, For connecting Stand & Stand Base) clockwise into the four holes marked using a
screwdriver as shown in the illustration.
!
CAUTION :
When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or
can be damaged. (torque screwdriver- below 15 kg.f.cm)
3.
Connect the upper Speaker to the assembled Stand.
4.
Insert another large screw (5*15, For connecting Speaker & Stand)
clockwise into the hole on the rear of the
speaker using a screwdriver.
5.
This is the appearance after the speaker is installed. Follow this steps to install other speaker.
2
4
2
4
1
Stand
Stand
Base
44
3
Stand
Speaker
5
HT-ES655WK-NO-EUR-ENG.indd 17
HT-ES655WK-NO-EUR-ENG.indd 17
2012-8-13 13:22:17
2012-8-13 13:22:17