|
26
English
Settings
Refresh
Close
Wi-Fi Direct
Device Name : [HTS]FS6200
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX
Disconnected
5.
You have three ways to complete the Wi-Fi
connection:
• Through the Wi-Fi device.
• Through the product using PBC.
• Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.
On the Wi-Fi device, follow the device's procedure
for connecting to another Wi-Fi Direct device. See
the device's user manual for instructions.
2.
When you have completed the procedure, you
should see a pop-up on your TV screen saying that
a device that supports Wi-Fi Direct has requested to
connect. Select
OK
, and then press the
E
button
to accept.
3.
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
• The PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1.
Select the Wi-Fi Direct device you want to connect
to this product, and then press the
E
button.
2.
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
Through the Product Using a PIN
1.
Select the Wi-Fi Direct device you want to connect
to this product, and then press the
E
button.
2.
The PIN pop-up appears.
3.
Note the PIN code in the pop-up, and then enter it
into the appropriate field in the Wi-Fi Direct device
you want to connect.
4.
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
| NOTES |
The current wired or wireless network connection
will be disconnected when you use the Wi-Fi Direct
function.
Text files, such as files with a .TXT or .DOC extension,
will not display when you are using the Wi-Fi Direct
function.
Upgrading Software
The Software Update menu allows you to upgrade the
product’s software for performance improvements or
additional services.
• Never turn the product off or back on manually
during the update process.
1.
In the Home menu, select
Settings
, and then press
the
E
button.
2.
Select
Support
, and then press the
E
button.
3.
Select
Software Update
, and then press the
E
button.
4.
To download update software and update now,
select
Update now
, and then press the
E
button.
See "Update now" on the next page for details.
5.
To let the product download update software
automatically when available, select
Auto update
,
and then press the
E
button. See "Auto update"
on the next page for details.
| NOTES |
The upgrade is complete when the product turns off,
and then turns on again by itself.
Samsung Electronics takes no legal responsibility for
product malfunction caused by an unstable Internet
connection or consumer negligence during a software
upgrade.
If you want to cancel the upgrade while the upgrade
software is downloading, press the
E
button.
When a system upgrade is progress, "UPDATE" is
displayed on the front panel.
HT-FS6200-XU_0529.indd 26
HT-FS6200-XU_0529.indd 26
2013-05-30 오전 10:56:45
2013-05-30 오전 10:56:45
