10
- English
Connections
Installing the Speakers on the Tallboy Stand
* HT-H4530 only - Front Speakers
1.
Turn the Stand Base upside-down and
connect it to the Stand.
2.
Use the driver to combine the screws on the
3 marked holes.
3.
Straighten a supplied speaker wire to the
gravity direction and put in the hole on the
center of Stand Base.
4.
Connect the upper Speaker to the assembled
Stand.
5.
Insert a screw clockwise into the hole on the
rear of the speaker using a screwdriver.
And then connect a speaker cable.
6.
This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
2
4
1
3
Stand Base
Stand
Speaker
Stand
5
6
Speaker Cable Connections
1.
Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle
to the colored sticker on the bottom of each speaker.
2.
Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of
the speaker plugs to the colors of the speaker jacks.
In case of HT-H4500
SURROUND
SURROUND
SURROUND
SURROUND
Center Speaker
Subwoofer
Front Speaker (L)
Front Speaker (R)
Surround Speaker (L)
Surround Speaker (R)
Refer to page 6 for the speakers of HT-H4530.
HT-H4500_30_ZC-0210.indd 10
HT-H4500_30_ZC-0210.indd 10
2014-02-12 3:46:13
2014-02-12 3:46:13