22
- English
Settings
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings
values manually.
Follow the Steps 1 to 3 in "Configuring Your Network
Connection". (See page 20)
1.
In the
Network Settings
screen, change
Network Type
to
Wireless
. The product
searches for and then displays a list of the
available networks.
2.
Scroll through the list, select the desired network
or
Add Network
, and then press the
E
button.
3.
If you selected a network in Step 2, go to Step 6.
If you selected
Add Network
, go to Step 4.
4.
Enter your wireless network or wireless router's
name.
•
Enter numbers directly using the number
buttons on your remote control.
•
Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the
E
button.
•
To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select
, and then press the
E
button.
•
To display symbols and punctuation, select
123#&
, and then press the
E
button. To
redisplay letters, select
123#&
, and then press
the
E
button.
When finished, select
Done
, and then press the
E
button.
5.
On the Security method screen that appears,
use the ▲▼ buttons to select the network's
Security method, and then press the
E
button.
On the next screen, enter your network's
security code or pass phrase.
•
Enter numbers directly using the number
buttons on your remote control.
•
Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the
E
button.
When finished, select
Done
, and then press
the
E
button. The product searches for the
network.
6.
The Network connection fail screen appears.
Use ◄► buttons to select
IP Settings
, and
then press the
E
button.
7.
Select the
IP setting
field, and then set it to
Enter manually
.
8.
Select a network parameter to enter (
IP
Address
, for example), and then press
E
button. Use the number keypad on your remote
control to enter the numbers for the parameter.
You can also enter numbers using the ▲▼
buttons. Use the ◄► buttons on the remote
control to move from entry field to entry field
within a parameter. When done with one value,
press the
E
button.
9.
Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 8.
10.
Repeat Steps 8 and 9 until you have filled in all
parameters.
✎
You can get the Network parameter values from
your Internet provider.
11.
When finished, select
Return
(
'
), and then
press the
E
button. The
Security Key
screen
appears.
12.
On the
Security Key
screen, enter your
network's Security Code or Pass Phrase. Enter
numbers directly using the number buttons on
your remote control. Enter letters by selecting
a letter with the ▲▼◄► buttons, and then
pressing the
E
button.
13.
When finished, select
Done
at the right of the
screen, and then press the
E
button. The
product verifies the network connection and
then connects to the network.
14.
After the home cinema verifies the network,
select
OK
, and then press the
E
button.
✎
You can also begin the Manual Network setup by
going to
Settings > Network > Network Status
.
HT-H5500K_50K_50WK-ZK_0328.indd 22
HT-H5500K_50K_50WK-ZK_0328.indd 22
2014-03-28 5:23:05
2014-03-28 5:23:05
