English
15
|
03
Connections
Installing the Speakers on the Tallboy Stand
1.
Turn the Stand Base upside-down and connect it to
the Stand.
2.
Use the driver to combine the screws on the 3
marked holes.
3.
Straighten a supplied speaker wire and put in the
hole on the centre of Stand Base.
4.
Connect the upper Speaker to the assembled
Stand.
5.
Insert a screw clockwise into the hole on the rear of
the speaker using a screwdriver.
And then connect a speaker cable.
6.
This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
Connecting The Speakers
1.
Match each speaker cable bundle to the correct speaker by matching the colour coded
plug on each bundle to the coloured sticker on the bottom of each speaker.
2.
To attach speaker wire to each speaker:
a.
Press down the red tab on the back of the speaker, insert the red wire, and then
release the tab.
b.
Press down the black tab on the back of the speaker, insert the black wire, and then
release the tab.
3.
Connect the speaker wire plugs from each speaker to the back of the product by
matching the colours of the speaker plugs to the colours of the speaker jacks.
Black
Red
1
Stand Base
Stand
3
4
Speaker
Stand
2
5
6
HT-H5556RK_HC_0702.indd 15
HT-H5556RK_HC_0702.indd 15
2014-07-02 9:46:55
2014-07-02 9:46:55