58
- English
Appendix
Symptom
Check/Remedy
The aspect ratio cannot be
changed.
~
You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box
mode, or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3
mode only. Refer to the Blu-ray Disc jacket, and then select the appropriate
function.
~
The product is not
working.
(Example: The power
goes off or you hear a
strange noise.)
~
The Product is not
working normally.
~
Press and hold the remote control's
e
(
EXIT
) button for 5 seconds in
STANDBY mode. This will reset the unit.
-
Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
You have forgotten the
rating level password.
~
With no disc in the product, press and hold the product's
@
button for
longer than 5 seconds.
INIT
appears on the display and all settings will return
to their default values.
-
Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
Can't receive radio
broadcasts.
~
Is the antenna connected properly?
~
If the antenna's input signal is weak, install an external FM antenna in an
area with good reception.
While listening to TV audio
through the product, there
is no sound.
~
If you press the
OPEN/CLOSE
^
button while listening to TV audio using the
D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and
the TV audio is muted.
"Not Available" appears on
screen.
~
The features or action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of
range.
If the HDMI output is set to
a resolution your TV cannot
support (for example,
1080p), you may not see a
picture on your TV.
~
Press and hold the
@
button on front panel for more than 5 seconds with no
disc in the product. All settings will revert to their factory settings.
No HDMI output.
~
Check the connection between the TV and the HDMI jack of the product.
~
Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output
appears on the screen.
~
If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
HT-H7730WM_ZA-0325_Eco.indd 58
HT-H7730WM_ZA-0325_Eco.indd 58
2014-03-25 11:51:28
2014-03-25 11:51:28