21
2
Load a disc.
•
Depending on the content of the disc, the initial screen may appear different.
1
Press
OPEN/
CLOSE
button to
open the disc
3
Press
OPEN/
CLOSE
button to
close the disc tray.
•
Place a disc gently into the
tray with the disc’s label
facing up.
Note
To stop playback, press
STOP
during playback.
•
If pressed once, “
PRESS PLAY
” is displayed and the stop position will be stored in memory.
If
PLAY/PAUSE
( ) button or
ENTER
button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
•
If pressed twice, “
STOP
” is displayed, and if
PLAY/PAUSE
( ) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press
PLAY/PAUSE
during playback.
•
To resume playback, press
PLAY/PAUSE
( ) button again.
DVD
VCD
CD
•
Playback starts automatically.
Disc Playback
Selecting the Video Format
Press and hold
NT/PAL
button on the remote controller for over 5 seconds while the power is turned off.
•
By default, the video format is set to "PAL".
•
"
NTSC
" or "
PAL
" will appear in the display.
At this time, press the
NT/PAL
button shortly to select between "
NTSC
" and "
PAL
".
•
Each country has a different video format standard.
•
For normal playback, the video format of the disc must be the same as the video format of your TV.
1p~38p(UP30/TP33)-GB 3/14/05 10:39 AM Page 24