Samsung HT-X250, Instruction Manual

ENG

OPERA

TION

27

26

Before Using Your Home Theater

To Operate your Samsung TV and the Home Theater with the HT-X250/HT-TX250's Remote Control

1

Plug the main unit's power cord into the AC power supply. 

■

Before plugging your system into a main socket, you must check the voltage setting.
If the voltage of the socket does not correspond to the setting on the rear of the unit, 
you may seriously damage your system.

2

Press the

TV

button to set the remote to TV mode.

3

Press the 

POWER

button to turn on your Samsung TV 

with this remote.

4

Press the

TV/VIDEO

button to select VIDEO mode on your TV.

5

Press the 

DVD RECEIVER

button to switch to DVD RECEIVER mode to

operate the DVD Home Theater

6

Press the 

FUNCTION

button on the main unit or 

DVD

button 

on the remote to enable DVD playback.

VIDEO

Disc Playback

1

Load a disc vertically into the Disc Insert Hole.

■

Insert a disc so that the label side faces facing forward.

■

Playback starts automatically.

2

To eject the disc, press the 

EJECT

button.

• Depending on the content of the disc, the initial screen may appear different. 

• Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system)

recommendations.

To stop playback, press the 

STOP

button during playback.

■

If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory. 

If the 

PLAY/PAUSE (

)

button or 

ENTER

button is pressed, playback resumes from the stop position.

(This function works only with DVDs.)

■

If pressed twice, 

<STOP>

is displayed, and if the 

PLAY/PAUSE (

)

button is pressed, playback starts from the 

beginning.

To temporarily pause playback, press the 

PLAY/PAUSE

(

)

button during playback.

■

To resume playback, press the 

PLAY/PAUSE (

)

button again.

The DVD Home Theater's remote can be used to control Samsung TVs.

ALL

Press and hold the 

NT/PAL

button on the remote controller for over 5 seconds

while the power is turned off. 

■

By default, the video format is set to <PAL>.

■

<NTSC> or <PAL> will appear in the display. At this time, press the 

NT/PAL

button shortly to select

between <NTSC> and <PAL>. 

■

Each country has a different video format standard. 

■

For normal playback, the video format of the disc must be the same as the video format of your TV. 

Selecting the Video Format

DVD

VCD

CD

HT-X250-TX250(1~41P)-NO EUR  2007.3.19  5:50 PM  Page 26