Samsung HT-X250, Instruction Manual

ENG

SETUP

53

52

Settings

(Con’t)

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
the video.

1

In Stop mode, press the 

MENU

button.

2

Press the Cursor

button to move to 

<Audio>

and then press the 

ENTER 

button.

3

Press the Cursor

button to move to 

<AV-SYNC>

and then press the 

ENTER

button.

4

Press the Cursor

,

button to select the AV-SYNC Delay Time  and then

press the

ENTER

button.

You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

Press the 

RETURN

button to return to the previous level.

Press the 

EXIT

button to exit the setup screen.

Setting the AV SYNC

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital
sound when watching movies at low volume at night.

1

In Stop mode, press the 

MENU

button.

2

Press the Cursor

button to move to 

<Audio>

and then press the 

ENTER 

button.

3

Press the Cursor

button to move to 

<DRC>

and then press the 

ENTER

button.

4

Press the Cursor

,

button to adjust the DRC.

When the Cursor 

button is pressed, the effect is greater, and when the Cursor 

button is

pressed, the effect is smaller.

Press the 

RETURN

button to return to the previous level.

Press the 

EXIT

button to exit the setup screen.

Setting the DRC (Dynamic Range Compression)

MOVE

ENTER

EXIT

CHANGE

EXIT

RETURN

MOVE

ENTER

EXIT

RETURN

MOVE

SELECT

EXIT

RETURN

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.

1

In Stop mode, press the 

MENU

button.

2

Press the Cursor

button to move to 

<Audio>

and then press the 

ENTER 

button.

3

Press the Cursor

button to move to 

<HDMI AUDIO>

and then press the

ENTER

button.

4

Press the Cursor

,

button to select <ON> or <OFF> and then press the 

ENTER

button.

• 

ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio 

is output through your TV speakers only.

• 

OFF : Video is transmitted over the HDMI connection cable only, and audio is output through 

the home theater speakers only.

Press the 

RETURN

button to return to the previous level.

Press the 

EXIT

button to exit the setup screen.

Setting the HDMI Audio

MOVE

ENTER

EXIT

RETURN

MOVE

SELECT

EXIT

RETURN

• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.

HT-X250-TX250(42~65P)-NO EUR  2007.3.19  5:57 PM  Page 52