Samsung HT-X40 Instruction Manual Download

Page: 23 / 33

ENG

SETUP

Settings

(Con’t)

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio
signals from the center and rear speakers.

In Stop mode, press the

MENU

button.

Press the Cursor

button to move to

<Audio>

and then press the

ENTER

button.

Press the Cursor

button to move to

<DELAY TIME>

and then press

the

ENTER

button.

Press the Cursor

button to move to the desired speaker and then

press the

ENTER

button.

Press the Cursor

button to set the Delay time.

You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and
15mSEC.

Press the

RETURN

button to return to the previous level.

Press the

EXIT

button to exit the setup screen.

Setting the Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by
adding a delay effect to the sound of the Center and Surround Speakers.

Setting CENTER SPEAKER

If the distance of Dc is equal to or longer than the distance of Df in the figure,
set the mode as 0ms. Otherwise, change the setting according to the table.

Setting REAR (SURROUND) SPEAKERS

If the distance of Df is equal to the distance of Ds in the figure, set the mode
as 0ms. Otherwise, change the setting according to the table.

Setting up the Speaker Delay Time

Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER

Ideal CENTER SPEAKER
placement

It is desirable to place all speakers within this circle.

Ideal
SURROUND
SPEAKER
placement

Distance between Df and Dc

Delay Time

0 inch 13.6 inches 27.2 inches 40.8 inches 4.5 feet 5.6 feet

0 ms

1 ms

2 ms

3 ms

4 ms

5 ms

Distance between Df and Dc

Delay Time

0 inch 40.8 inches 6.7 feet 10.0 feet 13.4 feet 16.7 feet

0 ms

3 ms

6 ms

9 ms

12 ms

15 ms

• With

(Dolby Pro Logic II), the delay time may be different for each mode.

• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
• The Center channel is only adjustable on 5.1 channel discs.

MOVE

ENTER

EXIT

RETURN

MOVE

CHANGE

EXIT

RETURN

• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary

(see page 51).

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker
configuration and whether certain speakers are used or not.

In Stop mode, press the

MENU

button.

Press the Cursor

button to move to

<Audio>

and then press the

ENTER

button.

In the

<SPEAKER SETUP>

, press the

ENTER

button again.

Press the Cursor

button to move to the desired speaker and then

press the

ENTER

button.

For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows :
SMALL

➝

NONE.

For L and R, the mode is set to SMALL.

•

SMALL : Select this when using the speakers.

•

NONE : Select this when no speakers are connected.

Press the

RETURN

button to return to the previous level.

Press the

EXIT

button to exit the setup screen.

Setting the Speaker Mode

MOVE

ENTER

EXIT

RETURN

MOVE

CHANGE

EXIT

RETURN

Please use the Registration code to register this player with the DivX (R) video on demand format.
To learn more, go to www.divx.com/vod.

DivX (R) registration

Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.

Press the

MENU

button while the disc tray is open.

Press the Cursor

button to move to

<Setup>

and then press the

ENTER

button.

Press the Cursor

button to move to

<DVD TYPE>