Samsung HT-X40, Instruction Manual

ENG

SETUP

47

46

Settings

(Con’t)

You can adjust the balance and level for each speaker.

1

In Stop mode, press the 

MENU

button.

2

Press the Cursor

button to move to 

<Audio>

and then press the 

ENTER 

button.

3

Press the Cursor

button to move to 

<SOUND EDIT>

and then press 

the 

ENTER

button.

4

Press the Cursor

,

button to select and adjust the desired item. 

Press the Cursor

,

button to adjust the settings.

Press the 

RETURN

button to return to the previous level.

Press the 

EXIT

button to exit the setup screen.

Setting the Audio

Press the 

SOUND EDIT

button and then press the Cursor

,

button.

Adjusting Front/Rear Speaker Balance

• You can select between 00, -6, and OFF.
• The volume decreases as you move closer to –6.

Adjusting Center/Rear/Subwoofer Speaker Level

• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.

Use the Test Tone feature to check the speaker connections.

1

In Stop mode, press the 

MENU

button.

2

Press the Cursor

button to move to 

<Audio>

and then press the 

ENTER 

button.

3

Press the Cursor

button to move to 

<TEST TONE>

and then press 

the 

ENTER

button.

The test tone will be sent to L

➝

C

➝

R

➝

SR

➝

SL

➝

SW in order.  

If the 

ENTER

button is pressed again at this time, the test tone will stop.

Press the 

RETURN

button to return to the previous level.

Press the 

EXIT

button to exit the setup screen.

Setting the Test Tone

Press the 

TEST TONE 

button.

■   

Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.

■   

Use this function to check that each speaker is correctly connected and that there is
no problem.

■   

When HDMI AUDIO is set to <ON> (audio is produced through TV speakers), 
the TEST TONE function is not available.

To end the test tone, press the 

TEST TONE

button again.

Alternative method: press the TEST TONE button on the remote.

Multi-Channel Pro Logic Mode

Start

L: Front Speaker (L)

C: Center Speaker

SW: Subwoofer 

R: Front Speaker (R)

SL: Rear Speaker (L)

SR: Rear Speaker (R)

MOVE

ENTER

EXIT

RETURN

STOP

EXIT

MOVE

ENTER

EXIT

RETURN

MOVE

CHANGE

EXIT

RETURN

X40(40~63P) SEA  2007.2.8  2:52 PM  Page 46