50
system setup
51
GB
●
SYSTEM SETUP
Press the
SOUND EDIT
button and then press the Cursor
◄
,
►
button.
Each time you press the SOUND EDIT button, you can see
the balance and level for each speaker.
Adjusting Front/Rear Speaker Balance
You can select between 0 dB, -6 dB, and OFF.
The volume decreases as you move closer to – 6 dB.
Adjusting Center/Rear/Subwoofer Speaker Level
The volume level can be adjusted in steps from +6dB to –6dB.
The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
SETTING THE DRC (DYNAMIC RANGE COMPRESSION)
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby
Digital sound when watching movies at low volume at night.
In Stop mode, press the
MENU
button.
Press the Cursor
▼
button to move to
Audio
and then press the
ENTER
or
►
button.
Press the Cursor
▼
button to move to
DRC
and then press the
ENTER
or
►
button.
Press the Cursor
▲
,
▼
to adjust the
DRC
.
When the Cursor
▲
button is pressed, the effect is greater, and
when the Cursor
▼
button is pressed, the effect is smaller.
d
Press the
RETURN
button to return to the previous level.
d
Press the
EXIT
button to exit the setup screen.
•
1.
2.
3.
4.
•
Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.
SETTING THE AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to
match the video.
In Stop mode, press the
MENU
button.
Press the Cursor
▼
button to move to
Audio
and then press the
ENTER
or
►
button.
Press the Cursor
▼
button to move to
AV-SYNC
and then press
the
ENTER
or
►
button.
Press the Cursor
▲
,
▼
button to select the
AV-SYNC
Delay Time
and then press the
ENTER
button.
You can set the audio delay time between 0 ms and 300 ms. Set
it to the optimal status.
d
Press the
RETURN
button to return to the previous level.
d
Press the
EXIT
button to exit the setup screen.
SETTING THE HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
In Stop mode, press the
MENU
button.
Press the Cursor
▼
button to move to
Audio
and then press the
ENTER
or
►
button.
Press the Cursor
▼
button to move to
HDMI AUDIO
and then
press the
ENTER
or
►
button.
Press the Cursor
▲
,
▼
button to select
ON
or
OFF
and then press
the
ENTER
button.
ON
: Both video and audio signals are transmitted over the HDMI
connection cable, and audio is output through your TV
speakers
only.
OFF
: Video is transmitted over the HDMI connection cable only, and
audio is output through the home theater speakers only.
d
Press the
RETURN
button to return to the previous level.
d
Press the
EXIT
button to exit the setup screen.
The default setting of this function is HDMI AUDIO OFF.
HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
1.
2.
3.
4.
•
1.
2.
3.
4.
•
•
M
RETURN
MOVE
ENTER
EXIT
CHANGE
EXIT
RETURN
MOVE
ENTER
EXIT
RETURN
MOVE
SELECT
EXIT
RETURN
MOVE
ENTER
EXIT
RETURN
MOVE
SELECT
EXIT
RETURN
02068B-HT-XA100,XA100C.indd 50-51
02068B-HT-XA100,XA100C.indd 50-51
2008-01-31 오후 4:16:02
2008-01-31 오후 4:16:02
