background image

ENG - 34

12  LICENCE

Manufactured under license from Dolby 
Laboratories. Dolby, Dolby Audio and the 
double-D symbol are trademarks of Dolby 
Laboratories Licensing Corporation.

For DTS patents, see http://patents.dts.
com. Manufactured under license from DTS 
Licensing Limited. DTS, the Symbol, DTS 
in combination with the Symbol, and DTS 
2.0 Channel are registered trademarks or 
trademarks of DTS, Inc. in the United States 
and/or other countries. © DTS, Inc. All Rights 
Reserved.

The terms HDMI and HDMI High-Definition 

Multimedia Interface, and the HDMI Logo are 
trademarks or registered trademarks of HDMI 
Licensing Administrator, Inc. in the United 
States and other countries.

The Bluetooth® word mark and logos are 
registered trademarks owned by the Bluetooth 
SIG, Inc. and any use of such marks by Samsung 
Electronics Co., Ltd. is under license. Other 
trademarks and trade names are those of their 
respective owners.

[ENERGY STAR]

ENERGY STAR qualified model only

 

– Your Samsung product is ENERGY STAR 

qualified in its factory default setting. 

Change to certain features, settings and 
functionality in this product can change the 
power consumption, possibly beyond the 
limits required for ENERGY STAR 

qualification.

 

– Environmental Protection Agency and 

Department of Energy. ENERGY STAR is a 
joint program of the Government agencies, 

designed to promote energy efficient 

products and practices.

Refer to www.energystar.gov for more 
information of the ENERGY STAR Program.

ENERGY STAR qualified model only

(Applicable to Thin Client models only)

As an ENERGY STAR® Partner, SAMSUNG has 
determined that this product meets the 
ENERGY STAR® guidelines for energy 

efficiency.

 

– The ENERGY STAR Program has been to 

reduced greenhouse gas emissions and 
save energy through voluntary labeling.

 

– Power management setting of this product 

have been enabled by default, and have 
various timing setting from 1 minutes to 5 
hours.

 

– The product can wake with a button press 

on the chassis from sleep mode.

ENERGY STAR qualified model only (The other 

models)

 

– As an ENERGY STAR Partner, Samsung has 

determined that this product or product 
models meets the ENERGY STAR guideline 

for energy efficiency.

Summary of Contents for HW-A530












































Reviews: