background image

ENG - 7

02  PRODUCT OVERVIEW

Front Panel / Top Panel of the Soundbar

Top Panel

Display 

Displays the product’s status and current mode.

 (Power) Button

Turns the power on and off.

 

Auto Power Down Function 

The unit turns off automatically in the following situations:

 

– In 

D.IN

 / 

HDMI

 / 

BT 

USB 

Mode : If there is no audio signal for 20 minutes.

 (Volume) Button

Adjusts the volume.

 

When adjusted, the volume level appears on the Soundbar’s front display.

 

(

Source) Button

Selects the source input mode.

Input mode

Display

Optical Digital input

D.IN

ARC (HDMI OUT) input

D.IN 

 TV ARC (Auto conversion)

HDMI input

HDMI

BLUETOOTH mode

BT

USB mode

USB

 

To turn on 

“BT PAIRING

” mode, change the source to “

BT

” mode, and then press and hold the  

 

(Source)

 button for more than 5 seconds.

 

When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.

 

When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

 

If you want to enjoy sound only from the Soundbar, you must turn off the TV’s speakers in the Audio 
Setup menu of your TV. Refer to the owner’s manual supplied with your TV.

Summary of Contents for HW-B530











































Reviews: