background image

ENG - 32

10  INSTALLING THE 

WALL MOUNT

Installation Precautions

 

Install on a vertical wall only.

 

Do not install in a place with high 
temperature or humidity.

 

Verify whether the wall is strong enough to 
support the product’s weight. If not, reinforce 
the wall or choose another installation point.

 

• Purchase and use the fixing screws or 

anchors appropriate for the kind of wall you 
have (plaster board, iron board, wood, etc.). If 

possible, fix the support screws into wall 

studs.

 

Purchase wall mounting screws according to 
the type and thickness of the wall you want to 
mount the Soundbar on.

 

– Diameter: M5

 

– Length: 1 3/8 inches (35 mm) or longer 

recommended.

 

Connect cables from the unit to external 
devices before you install the Soundbar on 
the wall.

 

Make sure the unit is turned off and 
unplugged from the power source before you 
install it. Otherwise, it may cause an electric 
shock.

Wallmount Components

Wall Mount Guide

x 2

(M4 x L10)

x 2

Holder-Screw

Screw

x 2

Bracket-Wall Mount

( AH81-15440A)

1. 

Place the 

Wall Mount Guide

 against the wall 

surface.

 

The 

Wall Mount Guide

 must be level.

 

If your TV is mounted on the wall, install 
the Soundbar at least 2 inches (5 cm) 
below the TV.

2 inches (5 cm) or more

Summary of Contents for HW-B53C











































Reviews: