18
English
Connections
HDMI Function
Using (HDMI-CEC)
is a function that enables you to control other Samsung Devices with your Samsung TV's
remote control. can be used by connecting this AV Receiver to a SAMSUNG TV using an
HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support
.
Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 17)
Set the function on your TV.
(See the TV instructions manual for more information.)
You can operate the volume on the AV receiver by using Volume buttons on the TV remote
control.
To Turn on
Press the
SETUP/MENU
button on the remote control.
Each time the button is pressed, the mode switches between
INPUT
and
SETUP OFF
.
Press the ▲▼ buttons to select
OPTION
, and then press the
ENTER
button.
Press the ▲▼ buttons to select
HDMI SETUP
, and then press the
ENTER
button.
Press the ▲▼ buttons to select
HDMI
, and then press the
ENTER
button.
Press the ▲▼ buttons to set
to
ON
, and then press the
ENTER
button.
To exit setup mode
Press the
SETUP/MENU
or
EXIT
button on the remote control.
SETUP OFF
appears on the display and Setup Mode is exited.
NOTE
If you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV
receiver using the TV’s remote control. This function is available only in connection with Samsung
TV and DVD player supporting (HDMI-CEC).
Please check your TV for the
logo. If your TV has an
logo, then it supports
the function.
When you are making connection, do not connect more than two AV receivers (
installed). Otherwise, it can cause a malfunction.
1.
2.
•
1.
•
2.
3.
4.
5.
•
✎
HW-D600_D650S_XAC_0614.indd 18
HW-D600_D650S_XAC_0614.indd 18
2011-06-17 10:34:51
2011-06-17 10:34:51