FUNCTIONS
16
TV SOUNDCONNECT
You can enjoy TV sound through your SoundStand when it is connected to a Samsung TV that supports the TV
SoundConnect function.
+
Connecting a TV to the SoundStand
Connect
1.
Turn on the TV and SoundStand.
•
Set the "Add New Device" menu selection of the
TV to "On".
2.
Press the (
) button on the main unit’s top panel or
the
Soundconnect
button on the remote control to
select the
TV
mode.
•
The
LED will blink indicating that TV is not
connected yet.
3.
On the TV, a message asking whether to enable the TV
SoundConnect function appears. "[Samsung]
SoundStand" is displayed on the TV screen.
4.
Select
<Yes>
using the TV remote to finish connecting
the TV and SoundStand.
•
The
LED will stop blinking when TV is
successfully connected.
●
Switching the SoundStand’s mode from TV to
another automatically terminates TV
SoundConnect.
●
To connect the SoundStand to another TV, the
existing connection must be terminated.
●
Terminate the connection to the existing TV,
then press the
Soundconnect
button on the
remote control for 5 seconds to connect to
another TV.
●
The TV SoundConnect (SoundShare) function is
supported by some Samsung TVs released from
2012 on. Check whether your TV supports the TV
SoundConnect (Soundshare) function before you
begin. (For further information, refer to the TV’s
user manual.)
●
If your Samsung TV was released before 2014,
check the SoundShare setting menu.
●
If the distance between the TV and
SoundStand exceeds 5m, the connection may
not be stable or the audio may stutter. If this
occurs, relocate the TV or SoundStand so that
they are within operational range, and then
re-establish the TV SoundConnect connection.
●
TV SoundConnect Operational Range
-
Recommended pairing range: within
50cm.
-
Recommended operational range: within
5m.
+
Using the Bluetooth POWER On
function with TV SoundConnect.
The Bluetooth POWER On function is available after you
have successfully connected the SoundStand to a
Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON, turning
the connected TV on or off will turn the SoundStand's
power on and off as well.
1.
Connect the TV with your SoundStand using the TV
SoundConnect function.
2.
Press the
Bluetooth POWER
button on the
SoundStand remote. The GREEN , and
LEDs appear on the SoundStand's display.
•
GREEN : The SoundStand turns on or off
when you turn the TV on or off.
•
RED : The SoundStand turns off when you
turn the TV off.
●
This function is supported only by some
Samsung TVs released from 2013 on.
●
If the SoundStand is connected to a TV
through TV SoundConnect, and you turn the
SoundStand off by turning off the TV, the
Bluetooth Power function will not turn the
SoundStand on, even if you connect another
Bluetooth device to it.
