12
INSTALLATION
+
Controlling the Soundbar using Your TV Remote Control
1.
Press and hold the
SOUND
button for more than 5 seconds while the Soundbar is turned on.
2.
"ON - TV REMOTE" appears on the Soundbar's display.
3.
In the TV's menu, set the TV speaker to external speaker.
●
TV menus differ by manufacturer and model. Refer to the TV's user manual for further information.
●
Only the /- and the MUTE buttons will be available to control the Soundbar.
●
This function is not available when the Soundbar is in the TV SoundConnect, TV ARC, or HDMI mode.
●
Manufacturers supporting this function:
- VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA
- This function may not be compatible with your TV's remote depending on the remote control's
manufacturer.
●
To turn off this function, press the
SOUND button for 5 seconds. "OFF - TV REMOTE" appears on
the Soundbar's display.
INSTALLING THE BATTERY IN THE REMOTE CONTROL
1.
Use a suitable coin to turn the
remote control's battery cover
counterclockwise to remove it
as shown in the figure above.
2.
Insert a 3V lithium battery. Keep the
positive (+) pole facing up when inserting
the battery. Put the battery cover on and
align the '●' marks side by side as
shown in the figure above.
3.
Use a suitable coin to
turn the remote control
battery cover clockwise
as far as it will go to fix it
in place.
