22
CONNECTIONS
●
Switching the Soundbar’s mode from TV to another mode automatically terminates TV SoundConnect.
●
To connect the Soundbar to another TV, the existing connection must be terminated.
●
To terminate the existing connection, press and hold the
p
button on the remote for 5 seconds or switch
to another mode. To connect to the other TV, follow Steps 1 through 4 on the previous page.
●
The TV SoundConnect (SoundShare) function is supported by some Samsung TVs released from 2012 on.
Check whether your TV supports the TV SoundConnect (SoundShare) function before you begin.
(For further information, refer to the TV’s user manual.).
●
If your Samsung TV was released before 2014, check the SoundShare setting menu.
●
If the distance between the TV and Soundbar exceeds 16.4 ft, the connection may not be stable or the
audio may stutter. If this occurs, relocate the TV or Soundbar so that they are within operational range, and
then re-establish the TV SoundConnect connection.
●
TV SoundConnect Operational Ranges:
-
Recommended pairing range: within 78.7 inches (within 2m).
-
Recommended operational range: within 16.4 ft. (5m).
●
The Play/Pause, Next, and Prev buttons on the Soundbar or Soundbar's remote do not control the TV.
+
Using the Bluetooth POWER On function
The Bluetooth POWER On function is available after you have successfully connected the Soundbar to a Bluetooth
compatible TV using TV SoundConnect. When the Bluetooth POWER On function is ON, turning the connected TV on
or off will turn the Soundbar's power on and off as well.
1.
Connect the TV to your Soundbar using the TV SoundConnect function.
2.
Press the
Bluetooth POWER
button on the Soundbar remote.
ON - BLUETOOTH POWER
appears on the
Soundbar's display.
•
ON - BLUETOOTH POWER
: The Soundbar turns on and off when you turn the TV on or off.
•
OFF - BLUETOOTH POWER
: The Soundbar only turns off when you turn the TV off.
●
This function is supported by some Samsung TVs released from 2013 on.
