ENG - 8
Auto Power Link
Auto Power Link automatically turns on the Soundbar when the TV is turned on.
1.
Connect the Soundbar and a TV with a digital optical cable.
2.
Press the
(Source)
button on the right side panel or on the remote control, and then select
“
D.IN
”.
3.
Press the
Left
button on the remote control for 5 seconds to turn Auto Power
Link on or off.
•
Auto Power Link is set to ON by default.
(To turn off this function, turn off Auto Power using the Soundbar.)
•
Depending on the connected device, Auto Power Link may not function.
•
This function is only available in the “
D.IN
” mode.
Method 2. Connecting Wirelessly
Connecting a TV via Bluetooth
When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
•
Only one TV can be connected at a time.
The initial connection
1.
Press the
(Source)
button on the right side panel or on the remote control, and then select
“
BT
”.
2.
Change “
BT
” to “
BT PAIRING
”.
•
If “
BT READY
” appears, press and hold the
(Source)
button on the right side panel of the
Soundbar or on the remote control for more than 5 seconds to display “
BT PAIRING
”.
3.
Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)
4.
Select “
[AV] Samsung Soundbar Mxxx M-Series
” from the list on TV’s screen.
An available Soundbar is indicated with “
Need Pairing
” or “
Paired
” on the TV Bluetooth device list.
To connect to the Soundbar, select the message and establish a connection.
•
When the TV is connected, [
TV Name
] → “
BT
” appears on the Soundbar’s front display.
5.
You can now hear TV sound from the Soundbar.
Summary of Contents for HW-M369
Page 1: ...HW M369 USER MANUAL ...
