ENG - 27
2.
Mark the location where the screws will go
through on the wall, and then remove the
Wall Mount Guide
. Next, drill holes for the
screws using an appropriately sized drill bit.
Center Line
Center Line
3.
Fasten the 2
Bracket-Wall
pieces firmly to
the wall at the marked locations using the
appropriate screws.
4.
Attach the Soundbar to the 2
Bracket-Wall
pieces as shown in the illustration.
5.
Insert a
Holder-Fix Mount
into each hole on
the product’s bottom side. Tighten each
Holder-Fix Mount
to fix the Soundbar to the
2
Bracket-Wall
pieces.
DC 19V
AUX IN
OPTICAL IN
HDMI IN
HDMI OUT
(TV-ARC)
5V 0.5A
•
Do not hang onto the installed unit and avoid
striking or dropping the unit.
• Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
cause an injury or damage the product.
•
When the unit is installed on a wall, please
make sure that children do not pull any of the
connecting cables, as this may cause it to fall.
•
For the optimal performance of a wall mount
installation, install the speaker system at
least 5 cm below the TV, if the TV is mounted
on the wall.
•
For your safety, if you do not mount the unit
on the wall, install it on a secure, flat surface
where it is unlikely to fall.
