background image

ENG - ii

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 
NOT REMOVE THE COVER (OR BACK). 
NO USER-SERVICEABLE PARTS ARE INSIDE. 
REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK. 

DO NOT OPEN.

This symbol indicates that high voltage 
is present inside. It is dangerous to 
make any kind of contact with any 
internal part of this product.

This symbol indicates that this product 
has included important literature 
concerning operation and maintenance.

Class II product : This symbol indicates 
that it does not require a safety 
connection to electrical earth (ground).

AC voltage : This symbol indicates that 
the rated voltage marked with the 
symbol is AC voltage.

DC voltage : This symbol indicates that 
the rated voltage marked with the 
symbol is DC voltage.

Caution, Consult instructions for use : 
This symbol instructs the user to 
consult the user manual for further 
safety related information.

WARNING 

 

• To reduce the risk of fire or electric shock, do 

not expose this appliance to rain or moisture.

CAUTION

 

TO PREVENT ELECTRIC SHOCK, MATCH WIDE 
BLADE OF PLUG TO WIDE SLOT, FULLY 
INSERT.

 

This apparatus shall always be connected to a 
AC outlet with a protective grounding 
connection.

 

To disconnect the apparatus from the mains, 
the plug must be pulled out from the mains 
socket, therefore the mains plug shall be 
readily operable.

 

Do not expose this apparatus to dripping or 

splashing. Do not put objects filled with 

liquids, such as vases on the apparatus. 

 

To turn this apparatus off completely, you 
must pull the power plug out of the wall 
socket. Consequently, the power plug must 
be easily and readily accessible at all times.

Summary of Contents for HW-N450























































































































































Reviews: