ENG - 18
07 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
•
You cannot connect more than one Bluetooth device at a time.
PAIR
OR
Bluetooth device
The initial connection
1.
Press the
PAIR
button on the remote control to enter the “
BT PAIRING
” mode.
(OR)
a.
Press the
(Source)
button on the right side panel and then select “
BT
”.
Change “
BT
” to “
BT READY
”.
b.
When “
BT READY
” appears, press and hold the
(Source)
button on the right side panel
of the Soundbar for more than 5 seconds to display “
BT PAIRING
”.
2.
On your device, select “
[AV] Samsung Soundbar Nxxx N-Series
” from the list that appears.
•
When the Soundbar is connected to the Bluetooth device, [
Bluetooth Device Name
] → “
BT
”
appears in the front display.
3.
Play music files from the device connected via Bluetooth through the Soundbar.
If the device fails to connect
•
If a previously connected Soundbar listing (e.g. “
[AV] Samsung Soundbar Nxxx N-Series
”) appears
in the list, delete it.
•
Then repeat steps 1 through 2.
NOTE
• After you have connected the Soundbar to your mobile device the first time, use the “
BT READY
”
mode to reconnect.
