background image

ENG - 37

11  INSTALLING THE WALL MOUNT

Installation Precautions

 

Install on a vertical wall only.

 

Do not install in a place with high temperature or humidity.

 

Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall 

or choose another installation point.

 

• Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster 

board, iron board, wood, etc.).  

If possible, fix the support screws into wall studs.

 

Purchase wall mounting screws according to the type and thickness of the wall you want to mount 

the Soundbar on.

 

– Diameter: M5

 

– Length: 1 3/8 inches or longer recommended.

 

Connect cables from the unit to external devices before you install the Soundbar on the wall.

 

Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an 

electric shock.

Wallmount Components

A

B

C

D A

B

C

D

x 2

E

F

G

H

E

F

G

H

x 2

A

B

C

D

x 3

(M5 x L50)

A

B

C

D

x 3

Installation Example

 

The following image is provided as a reference with a Q9F TV (2018 model). 

 

The TV and TV accessories are sold separately.

ONE 

CONNECT

3.2 ’’

2’’ (5cm) or more

E

F

G

H

Summary of Contents for HW-NW700/ZA















































Reviews: