ENG - 9
Manually connecting the Subwoofer
Before performing the manual connection procedure below:
•
Check whether the power cables for the Soundbar and subwoofer are connected properly.
•
Make sure that the Soundbar is turned off.
1.
Turn off the Soundbar main.
2.
Press and hold
ID SET
on the rear of the subwoofer for at least 5 seconds.
5 Sec
Rear of Subwoofer
Rear of Subwoofer
Blinking blue
fast
3.
Press the
Up
button on the remote control for 5 seconds or press the
ID SET
button located at the
bottom of the Soundbar.
ID SET
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
DC 19V
NETWORK
ID SET
NETWORK
ID SET
SO
UN
D
MO
DE
PAIR
5 Sec
OR
Bottom of the Soundbar Main Unit
4.
Check if the LINK LED is solid blue (connection complete).
Blue is On
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
established between the Soundbar and the
Wireless Subwoofer.
