background image

ENG - ii

SAFETY INFORMATION

 

• The following also applies to the Wireless 

Subwoofer (PS-WR55D).

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 
NOT REMOVE THE COVER (OR BACK). 
NO USER-SERVICEABLE PARTS ARE INSIDE. 
REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.
Refer to the table below for an explanation of 
symbols which may be on your Samsung product.

CAUTION

RISK OF ELECTRIC SHOCK. 

DO NOT OPEN.

This symbol indicates that high voltage 
is present inside. It is dangerous to 
make any kind of contact with any 
internal part of this product.

This symbol indicates that this product 
comes with important literature 
concerning operation and maintenance.

Class II product : This symbol indicates 
that a safety connection to electrical 
earth (ground) is not required. 
If this symbol is not present on a 
product with a power cord, the product 
MUST have a reliable connection to 
protective earth (ground). 

AC voltage : Rated voltage marked 
with this symbol is AC voltage.

DC voltage : Rated voltage marked 
with this symbol is DC voltage.

Caution. Consult Instructions for use : 
This symbol instructs the user to 
consult the user manual for further 
safety related information.

WARNING 

 

• To reduce the risk of fire or electric shock, do 

not expose this appliance to rain or moisture.

 

• To prevent injury, this apparatus must be 

securely attached to the floor/wall in 
accordance with the installation instructions.

 

• This product contains chemicals known to the 

State of California to cause cancer and birth 
defects or other reproductive harm.

CAUTION

 

• Do not expose this apparatus to dripping or 

splashing. Do not put objects filled with 
liquids, such as vases, on the apparatus. 

 

• To turn this apparatus off completely, you 

must pull the power plug out of the wall 
socket. Consequently, the power plug must 
be easily and readily accessible at all times.

FCC NOTE (for U.S.A):

FCC Supplier’s Declaration of Conformity

The party responsible for product compliance : 

Samsung Electronics America, Inc. 
QA Lab America
19 Chapin Rd. Building D Pine Brook NJ 07058
Tel : 1-973-808-6375

FCC Compliance Statement :

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two 
conditions: 
(1) This device may not cause harmful 
interference, and (2) this device must accept any 
interference received, including interference that 
may cause undesired operation.

Summary of Contents for HW-R60C










































Reviews: