ENG - 21
3. ID SET
Press the
Up
button on the remote control for 5 seconds.
•
Until pairing is complete, the Multicolour LED changes as
Red
→
Green
→
Blue
in turn.
Remote Control Button
LED Indicator
SOUN
D
MOD
E
PAIR
5 Sec
Red
→
Green
→
Blue Blinks
Pairing
Connection is complete
Cyan
Blinks X3
4.
Check if the LINK LED is solid blue (connection complete).
Front of the Wireless Subwoofer
Stops blinking.
Glows blue.
The LINK LED indicator stops blinking
and glows a solid blue when a
connection is established between the
Soundbar and the Wireless Subwoofer.
5.
If the SWA-W500 is not connected, repeat the procedure from Step 2 through 4.
NOTES
– Do not connect the power cord of this product or your TV to a wall outlet until all connections
between components are complete.
– Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
– The maximum transmission distance of the wireless signal of the main unit is about 10 m, but may
vary depending on your operating environment. If a steel-concrete or metallic wall is between the
main unit and the wireless subwoofer, the system may not operate at all, because the wireless
signal cannot penetrate metal.
PRECAUTIONS
– Wireless receiving antennas are built into the wireless subwoofer. Keep the units away from water
and moisture.
– For optimal listening performance, make sure that the area around the wireless subwoofer and
Wireless Receiver Module (Sold separately) is clear of any obstructions.
