ENG - 18
05 CONNECTING TO A TV
Connecting the TV that supports HDMI ARC (Audio Return Channel)
CAUTION
• When both the HDMI cable and optical cable are connected, the HDMI signal is received first.
•
To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals
marked ARC. Otherwise, the TV sound may not be output.
•
The recommended cable is
High Speed HDMI Cable with Ethernet
.
HDMI IN
(ARC)
DIGITAL
AUDIO IN
(OPTICAL)
HDMI
(ARC)
Connect to the HDMI IN (ARC) or
(eARC) port of your TV.
HDMI Cable
Bottom of the
Soundbar
Connect to the HDMI (ARC) port of
the Soundbar main unit.
Top of the Soundbar
LED
Indicator
White On -> Off
“
Digital Audio In
”
1.
With the Soundbar and TV turned off, connect the HDMI cable as shown in the figure.
2.
Turn on the Soundbar and TV.
3.
TV sound is output from the Soundbar.
•
When the TV sound is not output, press the
(Multi Function)
button
at the top of the
Soundbar or the
(Source)
button on the remote control to select the “
Digital Audio In
”
mode.
•
When the sound is not output, check the HDMI Cable connection again.
•
Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.