ENG - 13
(Sound Control)
By pressing the button, you can select the desired audio mode. The desired item can be adjusted using
the
Up
/
Down
buttons.
Each time the mode changes, the Multicolor LED blinks in white.
LED
Indicator
White Blinks X1
“
Treble
”
“
Bass
”
“
Sync
”
“
Side Level
”
– To control the volume of the treble or bass sound, select “
Treble
” or “
Bass
”
in Sound Settings, and
then adjust the volume between -6~+6 by using the
Up/Down
buttons.
– Press and hold the
(Sound Control)
button for about 5 seconds to adjust the sound for each
frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the
Left/Right
buttons and each can be adjusted to a setting between -6 to +6 using the
Up/Down
buttons. (Make sure the Sound mode is set to “
Standard
”.)
– To control the volume of the each speaker select “
Side Level
”
in Sound Settings, and then adjust the
volume between -6~+6 by using the
Up/Down
buttons.
– If the video on the TV and audio from the Soundbar are not synchronized, select “
Sync
” in Sound
Control, and then set the audio delay between 0~300 milliseconds by using the
Up/Down
buttons.
– “
Sync
” is only supported for some functions.
WOOFER (BASS) LEVEL
Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the
woofer (bass) volume level to 0 (Default), press the button.
VOLUME
Push the button up or down to adjust the volume.
LED
Indicator
White moves to right X1
Volume Up
White moves to left X1
Volume Down
