background image

SAFETY INFORMATION

•  The following also applies to the Wireless Subwoofer  

(PS-WS800D / PS-WS801D / PS-WS705D / PS-WS706D).

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT 

REMOVE THE COVER (OR BACK). 

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER 

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Refer to the table below for an explanation of symbols 

which may be on your Samsung product.

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT 

OPEN.

This symbol indicates that high voltage is 

present inside. It is dangerous to make any 

kind of contact with any internal part of this 

product.
This symbol indicates that this product has 

included important literature concerning 

operation and maintenance.
Class II product : This symbol indicates that a 

safety connection to electrical earth (ground) 

is not required. 

If this symbol is not present on a product 

with a power cord, the product MUST have 

a reliable connection to protective earth 

(ground).

AC voltage : Rated voltage marked with this 

symbol is AC voltage.
DC voltage : Rated voltage marked with this 

symbol is DC voltage.
Caution. Consult Instructions for use : This 

symbol instructs the user to consult the user 

manual for further safety related information.

WARNING

• 

To reduce the risk of fire or electric shock, do not expose 

this appliance to rain or moisture.

•  To prevent injury, this apparatus must be securely 

attached to the floor/wall in accordance with the 

installation instructions.

•  This product contains chemicals known to the State of 

California to cause cancer and birth defects or other 

reproductive harm.

CAUTION

•  Do not expose this apparatus to dripping or splashing. 

Do not put objects filled with liquids, such as vases, on 

the apparatus. 

•  To turn this apparatus off completely, you must pull the 

power plug out of the wall socket. Consequently, the 

power plug must be easily and readily accessible at all 

times.

Important Safety Instructions

Read these operating instructions carefully before using 

the unit. Follow all the safety instructions listed below. 

Keep these operating instructions handy for future 

reference.

1. 

Read these instructions.

2. 

Keep these Instructions.

3. 

Heed all warnings.

4. 

Follow all instructions.

5. 

Do not use this apparatus near water.

6. 

Clean only with dry cloth.

7. 

Do not block any ventilation openings.  

Install in accordance with the manufacturer’s 

instructions.

8. 

Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including 

amplifiers) that produce heat.

9. 

Do not defeat the safety purpose of the polarized or 

grounding-type plug.  

A polarized plug has two blades with one wider than the 

other. A grounding type plug has two blades and a third 

grounding prong. The wide blade or the third prong are 

provided for your safety. If the provided plug does not fit 

into your outlet, consult an electrician for replacement 

of the obsolete outlet.

10. 

Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the 

point where they exit from the apparatus.

11. 

Only use attachments/accessories specified by the 

manufacturer.

12. 

Use only with the cart, stand, tripod, 

bracket, or table specified by the 

manufacturer, or sold with the apparatus. 

When a cart is used, use caution when 

moving the cart/apparatus combination 

to avoid injury from tip-over.

13. 

Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14. 

Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 

damaged in any way, such as power-supply cord or 

plug is damaged, liquid has been spilled or objects 

have fallen into the apparatus, the apparatus has been 

exposed to rain or moisture, does not operate normally, 

or has been dropped.

PRECAUTIONS

1. 

Ensure that the AC power supply in your house complies 

with the power requirements listed on the identification 

sticker located on the bottom of your product. Install 

your product horizontally, on a suitable base (furniture), 

with enough space around it for ventilation (3~4 

inches). Make sure the ventilation slots are not covered. 

Do not place the unit on amplifiers or other equipment 

which may become hot. This unit is designed for 

continuous use.  

To fully turn off the unit, disconnect the AC plug from 

the wall outlet. Unplug the unit if you intend to leave it 

unused for a long period of time.

2. 

During thunderstorms, disconnect the AC plug from 

the wall outlet. Voltage peaks due to lightning could 

damage the unit.

3. 

Do not expose the unit to direct sunlight or other heat 

sources. This could lead to overheating and cause the 

unit to malfunction.

4. 

Protect the product from moisture (i.e. vases), and 

excess heat (e.g. a fireplace) or equipment creating 

strong magnetic or electric fields. Unplug the power 

cable from the AC wall socket if the unit malfunctions. 

Your product is not intended for industrial use. It 

is for personal use only. Condensation may occur if 

your product has been stored in cold temperatures. 

If transporting the unit during the winter, wait 

approximately 2 hours until the unit has reached room 

temperature before using.

5.  Fire or explosion may occur, resulting in damage to the 

remote control or personal injury.

•  Do not apply shock to the remote control.

•  Be careful not to let foreign substances such as 

metal, liquid, or dust come in contact with the 

charging terminal of the remote control.

•  When the remote control is damaged or you smell 

smoke or burning fumes, immediately stop operation 

and then repair it at the Samsung service center.

•  Do not arbitrarily disassemble the remote control.

•  Be careful not to let infants or pets suck or bite 

the remote control. Fire or explosion may occur, 

resulting in damage to the remote control or 

personal injury.

FCC NOTE (for U.S.A):

FCC Supplier’s Declaration of Conformity

Responsible Party - U.S. Contact Information:

Samsung Electronics America, Inc.

85 Challenger Road.

Ridgefield Park, NJ 07660

Phone: 1-800-SAMSUNG (726-7864)

FCC Compliance Statement :

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, 

including interference that may cause undesired operation.

FCC Caution :

• 

Any changes or modifications not expressly approved 

by the party responsible for compliance could void the 

user’s authority to operate this equipment.

• 

This product satisfies FCC regulations when shielded 

cables and connectors are used to connect the unit to 

other equipment.  

To prevent electromagnetic interference with electric 

appliances, such as radios and televisions, use shielded 

cables and connectors for connections. 

Class B FCC Statement

This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to Part 

15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses 

and can radiate radio frequency energy and, if not installed 

and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, 

there is no guarantee that interference will not occur 

in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by 

one of the following measures:

•  Reorienting or relocating the receiving antenna.

•  Increasing the separation between the equipment and 

receiver.

•  Connecting the equipment to an outlet that is on a 

different circuit than the radio or TV.

•  Consulting the dealer or an experienced radio/TV 

technician for help.

FCC Radiation Exposure Statement : 

This equipment complies with FCC radiation exposure 

limits set forth for an uncontrolled environment. This 

equipment should be installed and operated so there is 

at least 8 inches (20 cm) between the radiator and your 

body. This device and its antenna(s) must not be co-located 

or operated in conjunction with any other antenna or 

transmitter.

CALIFORNIA USA ONLY (Applicable for networking models 

only.)

This Perchlorate warning applies only to primary 

CR(Manganese Dioxide) Lithium coin cells in the product 

sold or distributed ONLY in California USA “Perchlorate 

Material - special handling may apply, See www.dtsc.

ca.gov/hazardouswaste/perchlorate.”

WARNING: Cancer and Reproductive Harm 

- www.P65Warnings.ca.gov.

Samsung products and recycling 

•  Dispose unwanted electronics through an approved 

recycler. To find the nearest recycling location, go to our 

website:www.samsung.com/recycling Or call, 1‐800‐

SAMSUNG

• 

WARNING!

 Never dispose of batteries in a fire because 

they may explode. Do not dissemble, crush, puncture, 

heat, burn or reuse batteries. For more information, 

visit call2recycle.org or call 1-800-822-8837. 

Alternatively, visit: www.samsung.com/ recycling or call 

1-800-SAMSUNG.

01  CHECKING THE 

COMPONENTS

•  Soundbar Main Unit

•  Soundbar Remote 

Control

•  Subwoofer

•  Power Cord X 2 

(Subwoofer, Soundbar)

•  AC/DC Adapter

•  HDMI to Micro HDMI 

Cable

•  Wall Mount Guide

•  Holder-Screw X 2

•  Screw (M5 X L55) X 4

•  Screw Anchor X 4

•  Bracket-Wall Mount X 2

NOTE

•  For more information about the power supply and 

power consumption, refer to the label attached to the 

product. (Label: Bottom of the Soundbar Main Unit)

•  To purchase additional components or optional 

cables, contact a Samsung Service Center or Samsung 

Customer Care.

02 PRODUCT OVERVIEW

Top Panel of the Soundbar

Volume

1

HW-S80*D

HW-S70*D

(Multi Function) Button

In standby mode, press the 

 (Multi Function)

 

button to turn on the Soundbar.

Press the 

 (Multi Function)

 button to change the 

mode.

(Mic On/Off) Button

Press the button to turn the microphone on or off.

When the microphone is off, the LED indicator will 

light red.

1

LED indicator

The LED Indicator flashes, glows, or changes color 

depending on the Soundbar’s current mode or 

status.

(Power) Button

Turns the power on and off.

(Source) Button

Press the 

 (Source)

 button to change the

input source.

•  To switch to Bluetooth Pairing state in “

Bluetooth

” 

mode, press and hold the 

 (Mic On/Off)

 or 

 (Source)

 button on the top of the Soundbar for more 

than 5 seconds.

Rear Panel of the Soundbar

DC 19V

SERVICE

HDMI

(eARC)

DC 19V

SERVICE

HDMI

(eARC)

DC 19V

SERVICE

HDMI

(eARC)

DC 19V

SERVICE

HDMI

(eARC)

DC 19V

SERVICE

HDMI

(eARC)

DC 19V

SERVICE

HDMI

(eARC)

3

1

2

1

SERVICE

Connect a USB storage device to upgrade the 

product’s software.

2

HDMI (eARC)

Connect to the HDMI jack on a TV.

3

DC 19V

Connect the AC/DC power adapter.  

(Power Supply In)

03 CONNECTING THE 

SOUNDBAR

Connecting the power and units

Rear of Subwoofer

Blue Blinks

HDMI IN 1

HDMI IN 2

ID SET

(WOOFER, REAR)

POWER

NETWORK

SERVICE

DIGITAL AUDIO IN

(OPTICAL)

HDMI TO TV

(eARC/ARC)

HDMI 1

HDMI 2

ID SET

HDMI IN 1

HDMI IN 2

SERVICE

DIGITAL AUDIO IN

(OPTICAL)

HDMI TO TV

(eARC/ARC)

HDMI 1

POWER

POWER

HW-S70*D

HW-S80*D

DC 19V

DC 19V

Rear of the Soundbar 

Main Unit

•  The LINK LED indicator stops blinking and glows a solid 

blue when a connection is established between the 

Soundbar and the Wireless Subwoofer.

04 USING A WIRED 

CONNECTION

Connecting using an HDMI to 

Micro HDMI Cable

HDMI IN

(ARC)

SERVICE

HDMI

(eARC)

HDMI to Micro 

HDMI Cable

Rear of the 

Soundbar

TV

NOTE

•  When using an HDMI to Micro HDMI cable, take caution 

not to break the cable terminal.

•  When the TV sound is not output, press the 

 (Multi 

Function)

 / 

 (Source)

 button at the top of the 

Soundbar or the 

 (Source)

 button on the remote 

control to select the “

TV ARC

” mode.

• 

The recommended cable is an HDMI cable certified by 

HDMI.org.

Using the Q-Symphony Function

When the Soundbar connects to a Samsung TV that 

supports the Q-Symphony function, you can play the sound 

simultaneously through the Soundbar and the TV. If you use 

the Q-Symphony function, the surround sound played on 

the TV allows you to enjoy a richer, more three-dimensional 

surround sound effect.

When the Soundbar is connected, “

Q-symphony

” menu 

appears on the TV. (The message displayed may differ with 

the TV model.)

(Settings (  

 ) → All Settings (    ) → Sound → Sound 

Output)

Simple User Guide

AH81-17428A-01 

NSPBI01572A-01

HW-S80*D / HW-S70*D

You can access the User guide on Samsung’s on-line customer support center by scanning the QR code on 
the left. To see the manual on your PC or mobile device, download the manual in document format from 
Samsung’s website.  (http://www.samsung.com/support)

QUESTIONS OR COMMENTS?

Samsung Service Center 

Web Site

Address

1-800-SAMSUNG (726-7864)

www.samsung.com/us/support

Samsung Electronics America, Inc.

85 Challenger Road Ridgefield Park, 

 

NJ 07660

© 2024 Samsung Electronics Co., Ltd. All rights reserved.

Reviews: