NOTES:
1.
Display keyset users can view message indications and return them in
any order.
2.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPK
or the
MONITOR
key if you using a 7B phone
before you begin dialing.
3.
If a message has been left at your keyset by a keyset in Auto Answer,
you must manually cancel the message after it has been returned.
PROGRAMMED MESSAGES
When you will be away from your phone for any length of time, you can leave
a programmed station message. Display stations calling you will see this
message and be informed of your status or follow your instructions.
•
Dial
48
plus any of the message codes (
01–30
) listed on the back of this
user guide.
•
To cancel any of these messages you might have selected, dial
48
plus
00
.
•
Press
TRSF
to exit and store your selection.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPK
key.
You can have multiple programmed message keys (
PMSG
) and each one
can have a different message code:
•
Press any programmed message (
PMSG
) button. The message is set
and the button will light red. Press the button again to turn off.
•
Pressing another programmed message (
PMSG
) button will turn the
previous one off and set a different programmed message.
31
To retrieve an automatically parked call:
•
Dial
10
plus the number that was announced. If you have a
PAGPK
key,
press it and dial the number that was announced. If you have a
PARK
key, press it and dial the announced orbit number.
•
You will be connected to the parked call.
NOTES:
1.
If the call is not retrieved within a pre-programmed period of time, it will
recall your keyset and have a slow flashing amber light. You cannot park
and page intercom calls.
3.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPK
key before you begin dialing.
SETTING A MESSAGE INDICATION
When you are calling another station and no one answers or you receive a
busy signal, you can leave a message indication:
•
Press the
MSG
key or dial
43
and receive confirmation tone.
•
Hang up. The
MSG
key on the called station will light. Standard tele-
phones receive special dial tone as a message indication or a lit mes-
sage lamp, if the phone is equipped with one and they are connected to
a 16MWSLI card on the system.
NOTES:
1.
A station can have up to five message indications.
2.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPK
key before you begin dialing.
CANCELING MESSAGES
To cancel a message indication that you left at another station, dial
42
plus
the extension number of the station at which you left a message.
To cancel all message indications left at your keyset, dial
42
plus your exten-
sion. Your
MSG
light will go out.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPK
key before you begin dialing.
RETURNING MESSAGES
•
Press the
MSG
key or dial
43
. The first station that left a message will be
called automatically. If that station does not answer, your
MSG
light will
stay on.
•
Repeat until all messages have been returned in the order received.
•
Your
MSG
light will turn off when all messages have been returned.
30
HOME PAGE
Table of Contents
Guide-Contents
