NETWORKING
(Enhanced Version Software/MEM4)
The iDCS 100 networking feature package (Enhanced Version Software Only) al-
lows the iDCS 100 system to be connected to an iDCS 100 or to an iDCS 100 via
some basic feature transparency. The physical connection between the systems is
via a proprietary PRI connection and is based on the Q-SIG specification. The fol-
lowing features are supported between two networked systems. Note that the en-
hanced version software is only available with a MEM4 card.
Call Completion, Busy Station (CCBS) also known as Callback or Busy Station
Callback. When a station in one system calls a station in another system across the
network link and the destination station is busy the calling station can set a Call-
back to the busy station. When the busy station becomes idle the system will notify
the callback originating station by ringing that station and when the originating
station answers, the system will call the destination station.
Call Completion, No Response (CCNR) also known as Callback or No Answer
Callback. When a station in one system calls a station in another system across the
network link and the destination station does not answer the calling station can set
a Callback to the called station. When that station indicates the user is present by
becoming busy then idle the system will notify the callback originating station by
ringing that station and when the originating station answers, the system will call
the destination station.
Call Forward Busy (CFB). This is a different feature from the normal call forward
busy and is only used when the forward destination is in a different node of the
network. The operation of the feature is the same as the normal forward busy where
when the forwarded station is busy a calling station will be forwarded to the for-
ward destination.
Call Forward No Response (CFNR). This is a different feature from the normal call
forward no answer and is only used when the forward destination is in a different
node of the network. The operation of the feature is the same as the normal forward
no answer where when the forwarded station does not answer after a programmed
amount of time a calling station will be forwarded to the forward destination.
Call Forward Unconditional (CFU). This is a different feature from the normal call
forward all and is only used when the forward destination is in a different node of
the network. The operation of the feature is the same as the normal forward all
where all calls to the forwarded station will be forwarded to the forward destination.
Forward External. This feature operates in the same manner as a non networked
system with the exception that, because calls across a network link are trunk calls,
network calls do not follow the ICM FWD EXT ON/OFF setting in MMC 210. It is
therefore suggested that this setting be set to ON in a networked switch to avoid
confusion in operation between networked and non networked calls.
4.18
HOME
PAGE
Table of
Contents