41
DISPLAY FEATURES
INTERACTIVE DISPLAY KEYS
The three keys below the display are substitutes for dedicated feature keys
and access codes. Pressing one of these keys has the same effect as press-
ing a programmable key. These keys are called soft keys as their functions
are not fixed. They change to present you with the best options for that call
condition. The use of soft keys allows the programmable keys to be used for
more
DSS
and speed dial keys.
The
SCROLL
key is used to display options available to the user at a partic-
ular time or during a specific procedure. Press this key once while in the idle
state to view the three main categories available.
201: STN NAME
CALL OTHER ANS
ANSWER:
Guides you through the options to answer calls.
OTHER:
Guides you through features other than making or answering calls.
CALL:
Guides you through the options to make a call.
Select one of the main categories:
CALL
,
OTHER
or
ANS
(
ANSWER
). Press
the
SCROLL
key to display additional options available under each of the
three main categories. The symbol
°
displayed as the last character on the
lower line of the display indicates that there are additional options. Press the
SCROLL
key to display these additional options.
User instructions will be displayed in lower case letters. Options assigned to
soft keys will be in upper case letters.
DIRECTORY INFORMATION
An 11 character directory name can be assigned to each extension number.
Display keyset users can view the name of the called or calling station before
answering.
Each outside line can have an 11 character directory name. Incoming calls
can be easily identified and answered with different greetings.
Outside and internal calls ringing to a station group will display [CALL FOR
xxx] where xxx is the station group number. This allows you to answer calls
directed to you differently than calls directed to your group.
40
KEY CONFIRMATION TONE
You can hear a short beep (confirmation tone) each time you press a button
on the dial pad. This tone can be turned on or off.
•
While on-hook, press
TRSF
and then dial
110
.
•
Dial
040
to turn tones off or
041
to turn tones on.
•
Press
TRSF
to store your selection.
REJOINING A PAGE
This feature allows you to hear the remaining portion of an ongoing internal
page after you return your keyset to idle. To enable this feature:
•
With the handset on-hook, press
TRSF
and then dial
110
.
•
Dial
051
to turn this feature on or
050
to turn it off.
•
Press
TRSF
to store your selection.
RING PREFERENCE
This feature automatically answers ringing calls when you lift the handset or
press the
ANS/RLS
or the
MONITOR
key if you are using a 7B phone. This
method will always answer calls in the order they arrived at your keyset.
When you turn ring preference off, you must press the flashing button to
answer a call, allowing you to answer calls in the order you choose.
• With the handset on-hook, press
TRSF
and then dial
110
.
• Dial
061
to turn ring preference on or
060
to turn it off.
• Press
TRSF
to store your selection.
HOME PAGE
Table of Contents
Guide-Contents
