23
DIALING FEATURES
SPEED DIALING
You can dial a preprogrammed telephone number stored in the system-wide
speed dial list of numbers 500–999 or from your personal list of numbers
00–49:
•
With the handset on-hook, press the
MEMORY
key or dial
16
.
•
Dial the desired speed dial number.
•
The telephone number is automatically dialed for you.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPEAKER
key before you begin dialing.
PROGRAMMING PERSONAL SPEED
DIAL NUMBERS
You can program frequently dialed telephone numbers in a personal speed
dial list. A station may be assigned up to fifty numbers,
00–49
. See your sys-
tem administrator to determine the amount assigned to your station.
•
While on-hook, press
TRANSFER
and then dial
105
.
•
Dial a speed dial number (
00–49
).
•
Dial a line or line group access code.
•
Dial the telephone number to be stored (18 digits maximum). It can in-
clude #,
✱
, FLASH and PAUSE.
•
Press
TRANSFER
to store the number.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPEAKER
key before you begin dialing.
For the purposes of programming speed dial numbers, the programmable
keys are known as
A
,
B
,
C
,
D
,
E
and
F
and are defined below.
Transfer Speaker
A
B
C
D
E
F
A
C
E
Transfer
Speaker
VOLUME
B
D
F
28B KEYSET
18B KEYSET
DEFAULT
PROGRAMMING
KEYS LAYOUT
8B KEYSET DEFAULT
PROGRAMMING
KEYS LAYOUT
CALL FORWARD OPTIONS
A display keyset may review or change call forward options and destina-
tions. Call forward access can be done via the keypad or by accessing the
keyset display features. To review or change call forward options:
•
Press
TRANSFER 102
.
•
Dial
0-5
to select the forward type (e.g.,
1
)
OR
Press
UP
or
DOWN
to select the forward type
Press the right soft key to move the cursor
•
Dial the destination number (e.g.,
202
)
OR
Press
UP
or
DOWN
to select the destination
Press the right soft key to move the cursor
•
Dial
1
to set
OR
Press
UP
or
DOWN
to select
YES
or
NO
•
Press
TRSF
to store and exit
STATION CALL PICKUP
To pick up (answer) a call ringing at another station, lift the handset and dial
65
plus the extension number of the ringing phone.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPEAKER
key before you begin dialing.
GROUP CALL PICKUP
To pick up (answer) a call ringing in any pickup group, lift the handset and
dial
66
plus the desired group number
01–20
or press the flashing
GROUP
PICKUP
key if available.
NOTES:
1. A group pickup key can have an extender for a specific pickup group.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
key before dialing the access code.
3. Station and group pickup features cannot be used to answer recalls to
a station, only new ringing calls and operator recalls.
22
