27
MEET ME PAGE
•
Lift the handset.
•
Press the Meet Me Page (
MMPG
) key or dial
54
.
•
Dial the desired zone number.
•
After the attention tone, instruct the paged person to dial
56
.
•
Press
WAIT
or
TRANSFER
.
•
Remain off-hook until the person dials
56
from any phone.
•
The paged person will be automatically connected with you.
CALL PARK AND PAGE
When you have an outside call for someone who is not at his/her desk, you
can park the call and page the requested party:
•
While in conversation, press the
PAGE
button. The call is automatically
parked at your station.
•
Dial the desired page zone and announce “park” and your extension
number or the line number. Hang up.
To retrieve a parked call:
•
Dial
10
plus the number that was announced. If you have a
PAGE PICK-
UP
(
PAGPK
) key, press it and dial the number that was announced.
•
You will be connected to the parked call.
NOTES:
1. If the parked call is not retrieved within a pre-programmed period of
time, it will recall your keyset and have a slow flashing amber light. You
cannot park and page intercom calls.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
key before you begin dialing.
SETTING A MESSAGE INDICATION
When you are calling another station and no one answers or you receive a
busy signal, you can leave a message indication:
•
Press the
MESSAGE
key or dial
43
and receive confirmation tone.
•
Hang up. The
MESSAGE
key on the called station will light. Standard
telephones receive special dial tone as a message indication.
NOTES:
1. A station can have up to five message indications.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
key before you begin dialing.
PAGING AND MESSAGING
MAKING AN INTERNAL PAGE
To make an announcement through the keyset speakers:
•
Lift the handset.
•
Press the
PAGE
key or dial
55
.
•
Dial the desired zone number
1
,
2
,
3
or
4
.
OR
Dial
0
to page all internal zones.
•
After the attention tone, make your announcement.
NOTE: If you have a dedicated page zone key, it is not necessary to press
PAGE
and dial a zone number.
MAKING AN EXTERNAL PAGE
To make an announcement through the external paging speakers:
•
Lift the handset.
•
Press the
PAGE
key or dial
55
.
•
Dial the desired zone number
5
,
6
,
7
or
8
.
OR
Dial
9
to page all external zones.
•
After the attention tone, make your announcement.
NOTE: If you have a dedicated page zone key, it is not necessary to press
PAGE
and dial a zone number.
ALL PAGE
To page all designated keysets and external speakers at the same time:
•
Lift the handset.
•
Press the
PAGE
key or dial
55
.
•
Dial
✱
or press the
ALL PAGE
key.
•
After the attention tone, make your announcement.
NOTE: The LED on the
PAGE
key will only light when an All Page is in
progress.
26
