background image

29

AUTOMATIC REDIAL/RETRY

When you are making an outside call and you receive a busy signal, the sys-
tem can automatically redial the number for you. It will automatically redial at
a pre-programmed interval for up to 15 attempts.

• When you hear a busy signal, press the 

RETRY

button.

• The system will reserve the line and automatically redial the same num-

ber for you. You will hear the call being made through the keyset speak-
er. The microphone is muted.

• When the called party answers, lift the handset or press the flashing 

SPK

to begin speaking.

NOTES:

1. If you make another call, auto-redial is canceled. 
2. To cancel a retry, lift and replace the handset.

PULSE TO TONE CHANGEOVER

When making an outside call on a dial pulse line, press 

#

. All digits dialed

after the 

#

with be sent as tones.

MEMO REDIALING

[L VERSION ONLY]

When you are calling directory information, you can store the number you
are given using the 

SAVE

feature. There is no need for pencil and paper.

• While you are talking on an outside call, press 

SAVE

.

• Dial the telephone number as it is dictated to you on the key pad.
• Press 

SAVE

to store the number.

To dial the number, press the 

SNR

button. It will select the same line and dial

the stored number. If necessary, you can select a different line and then
press the SNR button.

28

PAGING AND MESSAGING

MAKING AN INTERNAL PAGE

To make an announcement through the keyset speakers:

• Lift the handset.
• Press the 

PAGE

key or dial 

55

.

• Dial the desired zone number 

1

2

3

or 

4

.

OR

Dial 

0

to page all internal zones.

• After the attention tone, make your announcement.

NOTE: If you have a dedicated page zone key, it is not necessary to press

PAGE

and dial a zone number.

MAKING AN EXTERNAL PAGE

To make an announcement through the external paging speakers:

• Lift the handset.
• Press the 

PAGE

key or dial 

55

.

• Dial the desired zone number 

5

6

7

or 

8

.

OR

Dial 

9

to page all external zones.

• After the attention tone, make your announcement.

NOTE: If you have a dedicated page zone key, it is not necessary to press

PAGE

and dial a zone number.

ALL PAGE

To page all designated keysets and external speakers at the same time:

• Lift the handset.
• Press the 

PAGE

key or dial 

55

.

• Dial 

or press the 

ALL PAGE

key.

• After the attention tone, make your announcement.

NOTE: The LED on the 

PAGE

key will only light when an All Page is in

progress.

Summary of Contents for iDCS 500













































































































































Reviews: