Samsung
i
DCS500
DCS (Euro) Keyset User Guide
– 26 –
OR
Press the
VOLUME
keys
to select the destination and press the right
soft key to move the cursor.
(Note: If you selected option
6
, dial the access code and external number and
press the right soft key to move the cursor.)
4. Dial
1
to set forwarding (
YES
)
OR
Press the
VOLUME
keys
to select
YES
(Note: Selecting NO will turn off the forwarding option selected)
5. Press
TRSF
to store and exit.
EXTENSION CALL PICKUP*
To pick up (answer) a call ringing at another extension, lift the handset and
dial
65
followed by the number of the ringing extension.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
key before you begin dialling.
GROUP CALL PICKUP*
To pick up (answer) a call ringing in any pickup group, lift the handset and
dial
66
followed by the desired group number 01–99, or press the flashing
GROUP PICKUP
key if available.
Note:
•
A group pickup key can have an extender for a specific pickup group (see
Adding Extenders to Key Assignments
play Features
”
).
•
If the Hot Keypad feature has been turned off, you must first lift the handset or
press the
SPEAKER
key before dialling the access code.
MY GROUP PICKUP*
A separate access code may be assigned to pick up ringing calls in your
own pickup group. See your system administrator for the assigned access
code, if one is available, and enter it here: MYGRPK code = _____.
To pick up a call, dial the code (you do not need to dial the group number).
*
For new ringing calls and operator recalls only
. Station and group pickup features
can be used to answer
recalls to a station
only if the required option is enabled on
your sys
tem. Check with your system adminis
trator if this is the case.
