3-10
Chapter 3
Installing the InfoRanger
Multiple PCs Connection
The amount of PCs is dependent on the Cable Service Provider. Contact
your Cable Service Provider for further information.
If you want to connect more than one PC to the InfoRanger, you need to prepare
the following additional items:
y
An Ethernet hub or switch of 10/100Mbps transmission speed
y
Twisted pair category-3,4,5 crossover cable
y
Twisted pair-category-3,4,5 straight-through cables equal to the number of PCs
The specifications of twisted pair category-3,4,5 crossover cables and
straight-through cables are described at Appendix D in detail.
You can connect the InfoRanger to fifteen PCs simultaneously by using
Ethernet port.
If the user needs more than one straight-through cable to connect multiple
PCs to InfoRanger, he/she should prepare the necessary cables by
himself/herself because only one straight-through cable is supplied with
InfoRanger by default.
After preparing all the things to connect additional PCs, do the followings.
1. Turn off all the PCs you want to connect to the InfoRanger.
2. Connect one end of twisted pair category-3,4,5
crossover
cable to the
Ethernet
port of the InfoRanger. Then, connect the other end of cable to the port of hub.
Summary of Contents for InfoRanger SCM-140U
