setup screen
M
`
In AWC mode, click the [
AWC Set
] button if you want to keep the white balance level of the
current image.
J
`
The white balancing may not work properly in the following conditions:
If this is the case, switch to AWC mode.
-
If the surrounding condition of the object is out of the temperature correction range
ex) Clear sky, sunset
-
If the surrounding of the object is dark
-
If the focus of the camera directly faces the florescent lighting or if the camera is installed in a
place of variable illumination, the white balancing operation may be unstable.
BLc Setup
You can specify a desired area on the video manually and set the area to be displayed
more clearly.
1.
Select <
Backlight
>.
2.
Set <
mode
> to <
BLc
>.
3.
Set <
BLc level
>.
You can change the level to adjust the
brightness of the monitoring area.
4.
Set the <
top, Bottom, Left, right
>
levels to specify the target area.
exposure Setup (SnD-5011/SnD-7011)
You can adjust the exposure level of the camera.
1.
Select <
exposure
>.
2.
Select each item and set it properly.
•
Brightness : Adjust the screen
brightness.
•
Shutter mode : Adjust the electronic
shutter of the camera.
- Auto : Adjust the shutter speed
automatically according to the
ambient brightness.
- Manual : Adjust the shutter speed of the camera manually.
- A.FLK (Anti flicker) : Select this feature if you encounter a flickering screen due
to a frequency mismatch with the ambient lighting.
52_
setup screen
