manual netWork setup
Run <
Ip Installer_v2.XX.exe
> to display the camera search list.
At the initial startup, both [
auto set
] and [
manual set
] will be grayed out.
M
`
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
a
Select a camera in the search list.
b
Click [
manual set
].
The Manual Setting dialog appears.
c
In the <
address
> pane, provide the
necessary information.
d
In the <
port
> pane, provide necessary
information.
•
HTTP Port : Used to access the
camera using the Internet browser,
defaulted to 80. Use the spin button
to change the HTTP Port value.
•
VNP Port : Used to control the video
signal transfer, defaulted to 4520.
e
Enter the password.
The default password is “
4321
”.
J
`
The default password can be exposed to a hacking thread so it is recommended to change the
password after installing the product.
Note that the security and other related issues caused by the unchanged password shall be
responsible for the user.
f
Click [
ok
].
Manual network setup will be completed.
4_
English
b
a
d
c
e
f