background image

1.11.

 ‘’Source Code’’ means the preferred form of the Covered 

Code for making modifications to it, including all modules it 

contains, plus any associated interface definition files, scripts 

used to control compilation and installation of an Executable, or 

source code differential comparisons against either the Original 

Code or another well known, available Covered Code of the 

Contributor’s choice. The Source Code can be in a compressed 

or archival form, provided the appropriate decompression or 

de-archiving software is widely available for no charge. 

1.12.

 "You’’ (or "Your") means an individual or a legal entity 

exercising rights under, and complying with all of the terms of, 

this License or a future version of this License issued under 

Section 6.1. For legal entities, "You’’ includes any entity which 

controls, is controlled by, or is under common control with You. 

For purposes of this definition, "control’’ means (a) the power, 

direct or indirect, to cause the direction or management of 

such entity, whether by contract or otherwise, or (b) ownership 

of more than fifty percent (50%) of the outstanding shares or 

beneficial ownership of such entity.

2. Source code License.
2.1.

 The Initial Developer Grant. The Initial Developer hereby 

grants You a world-wide, royalty-free, non-exclusive license, 

subject to third party intellectual property claims:
(a)  under intellectual property rights (other than patent 

or trademark) Licensable by Initial Developer to use, 

reproduce, modify, display, perform, sublicense and 

distribute the Original Code (or portions thereof) with 

or without Modifications, and/or as part of a Larger 

Work; and 

(b)  under Patents Claims infringed by the making, using 

or selling of Original Code, to make, have made, use, 

practice, sell, and offer for sale, and/or otherwise dispose 

of the Original Code (or portions thereof).

 (c)  the licenses granted in this Section 2.1(a) and (b) are 

effective on the date Initial Developer first distributes 

Original Code under the terms of this License. 

(d)  Notwithstanding Section 2.1(b) above, no patent license 

is granted: 1) for code that You delete from the Original 

Code; 2) separate from the Original Code;  or 3) for 

infringements caused by: i) the modification of the Original 

Code or ii) the combination of the Original Code with 

other software or devices.  

2.2.

 Contributor Grant. Subject to third party intellectual property 

claims, each Contributor hereby grants You a world-wide, 

royalty-free, non-exclusive license
(a)  under intellectual property rights (other than patent or 

trademark) Licensable by Contributor, to use, reproduce, 

modify, display, perform, sublicense and distribute the 

Modifications created by such Contributor (or portions 

thereof) either on an unmodified basis, with other 

Modifications, as Covered Code and/or as part of a 

Larger Work; and 

(b)  under Patent Claims infringed by the making, using, or 

selling of  Modifications made by that Contributor either 

alone and/or in combination with its Contributor Version 

(or portions of such combination), to make, use, sell, 

offer for sale, have made, and/or otherwise dispose of: 

1) Modifications made by that Contributor (or portions 

thereof); and 2) the combination of  Modifications made 

by that Contributor with its Contributor Version (or 

portions of such combination). 

(c)  the licenses granted in Sections 2.2(a) and 2.2(b) are 

effective on the date Contributor first makes Commercial 

Use of the Covered Code.

(d)  Notwithstanding Section 2.2(b) above, no patent license is 

granted: 1) for any code that Contributor has deleted from 

the Contributor Version; 2)  separate from the Contributor 

Version;  3)  for infringements caused by: i) third party 

modifications of Contributor Version or ii)  the combination of 

Modifications made by that Contributor with other software  

(except as part of the Contributor Version) or other devices; 

or 4) under Patent Claims infringed by Covered Code in the 

absence of Modifications made by that Contributor.

3. Distribution obligations.
3.1.

 Application of License. The Modifications which You create 

or to which You contribute are governed by the terms of this 

License, including without limitation Section 2.2. The Source 

Code version of Covered Code may be distributed only under 

the terms of this License or a future version of this License 

released under Section 6.1, and You must include a copy of this 

License with every copy of the Source Code You distribute. You 

may not offer or impose any terms on any Source Code version 

that alters or restricts the applicable version of this License or 

the recipients’ rights hereunder. However, You may include an 

additional document offering the additional rights described in 

Section 3.5. 

3.2. 

Availability of Source Code. Any Modification which You 

create or to which You contribute must be made available in 

Source Code form under the terms of this License either on 

the same media as an Executable version or via an accepted 

Electronic Distribution Mechanism to anyone to whom you 

made an Executable version available; and if made available 

via Electronic Distribution Mechanism, must remain available 

for at least twelve (12) months after the date it initially became 

available, or at least six (6) months after a subsequent version 

of that particular Modification has been made available to such 

recipients. You are responsible for ensuring that the Source 

Code version remains available even if the Electronic Distribution 

Mechanism is maintained by a third party. 

3.3.

 Description of Modifications. You must cause all Covered 

Code to which You contribute to contain a file documenting the 

changes You made to create that Covered Code and the date 

of any change. You must include a prominent statement that the 

Modification is derived, directly or indirectly, from Original Code 

provided by the Initial Developer and including the name of the 

Initial Developer in (a) the Source Code, and (b) in any notice in 

an Executable version or related documentation in which You 

describe the origin or ownership of the Covered Code. 

3.4. intellectual property matters

(a)  Third Party Claims. If Contributor has knowledge that a 

license under a third party’s intellectual property rights is 

required to exercise the rights granted by such Contributor 

under Sections 2.1 or 2.2, Contributor must include a text 

file with the Source Code distribution titled "LEGAL’’ which 

describes the claim and the party making the claim in 

sufficient detail that a recipient will know whom to contact. 

If Contributor obtains such knowledge after the Modification 

is made available as described in Section 3.2, Contributor 

shall promptly modify the LEGAL file in all copies Contributor 

makes available thereafter and shall take other steps (such as 

notifying appropriate mailing lists or newsgroups) reasonably 

calculated to inform those who received the Covered Code 

that new knowledge has been obtained. 

(b)  Contributor APIs. If Contributor’s Modifications include 

an application programming interface and Contributor 

has knowledge of patent licenses which are reasonably 

necessary to implement that API, Contributor must also 

include this information in the LEGAL file.  

(c) Representations.
Contributor represents that, except as disclosed pursuant to 

Section 3.4(a) above, Contributor believes that Contributor’s 

Modifications are Contributor’s original creation(s) and/or 

Contributor has sufficient rights to grant the rights conveyed by 

this License.

Summary of Contents for iPolis SNV-6084





















































































































































Reviews: