iPOLiS Network Design Tool User Guide
Functions
17
Description: Input the relevant information on the camera.
Quantity: Display the number of cameras for group object.
B.
IP Configuration: Network information of a camera object.
Address Type: Specify one of network address type.
IP Address: Enter network IP address.
Subnet Mask: Enter subnet mask address.
Gateway: Enter network gateway address.
DNS Server: Enter DNS server address.
C.
Advanced Setup: Open the advanced setting window for video profile setting of a camera.
Unit ID: Select ID of camera.
Apply to others: Apply profiles to other selected camera.
IP Assign: Set the network address of single device or multiple devices.
Scene activity: Specify how complex scene and frequent movement the video has. If a
video includes complex patterns or a lot of movements, select ‘HIGH’. Otherwise, the
video includes simple background and rare movement, select ‘LOW’
Use: Select or clear whether the camera uses multiple profiles or not.
Profile options (Codec/Resolution/Framerate/Compression/Bitrate Type/Bitrate):
Specify video settings for each profile.
Encoder
A.
Device Information: Basic information of an encoder object.
Name: Specify the name of encoder. The default name is model number.
Location #1 ~ #4: Specify the location where the encoder is installed. According to a
whole system diagram, up to 4-depth location can be specified.
Description: Input the relevant information on the encoder.
Quantity: Display the number of cameras for group object.
B.
IP Configuration: Network information of an encoder object.
Address Type: Specify one of network address type.
IP Address: Enter network IP address.
Subnet Mask: Enter subnet mask address.
Gateway: Enter network gateway address.
DNS Server: Enter DNS server address.
C.
Video Setup: Video profile setting of an encoder.
Scene activity: Specify how complex scene and frequent movement the video has. If a
