12
T E L E C O M
DIALLING USING SPEED DIAL NUMBERS
You can dial speed dial numbers from the list of system numbers 500-999 or 050-999 created by the system administrator or from
the personal list of numbers 00-49 or 000-049 you have created.
1.
Press the programmed [SPD] button or dial [1][6].
2.
Dial the speed dial number programmed for the number you want to call (e.g. 00) The number is dialled automatically.
TIP: Alternatively, to dial one of your first 10 personal speed dial numbers: Without lifting the handset, hold down a dial pad
button 0–9 corresponding to the speed dial number (00–09) for approximately two seconds. The telephone number programmed
in the personal speed dial location will be dialled automatically.
PROGRAMMING ONE-TOUCH SPEED DIAL BUTTONS
You can assign frequently used speed dial numbers to one-touch speed dial buttons for even more convenience. To do this, you
must have a programmed [SPD] button for each speed dial you require.
1.
Press the [Transfer] button.
2.
Dial [1][0][7].
3.
Press a [SPD] button.
4.
Enter the speed dial number (00-49 to 500-999) or (000-049 to 050-999) to be assigned to this button.
5.
Press the [Transfer] button to save the selected number.
Now, to make a call to the number, simply press this speed dial button.
STATION CALL PICKUP
If a call rings at another extension and you know the extension number:
1.
Pick up the handset or press the [Speaker] button.
2.
Dial [6][5].
3.
Dial the number of the ringing extension.
GROUP PICK UP
Extensions may be assigned to call pickup groups. If this is the case, when a call rings at another extension, and you know the
pickup group number:
1.
Pick up the handset or press the [Speaker] button.
2.
Dial [6][6] and dial the pickup group number. Or Press the flashing [PICKUP] button, if programmed.
NB: Station Call Pickup and Group Call Pickup cannot answer the recalls arriving on stations, and are only used for newly incom-
ing calls (external/internal) and operator recalls.
